netdev - Re: [PATCH] net: phy: at803x: mask 1000 Base-X link mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YNiwlHiNH7rVKpip@lunn.ch>
Date:   Sun, 27 Jun 2021 19:08:36 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     David Bauer <mail@...id-bauer.net>
Cc:     hkallweit1@...il.com, linux@...linux.org.uk, davem@...emloft.net,
        kuba@...nel.org, netdev@...r.kernel.org
Subject: Re: [PATCH] net: phy: at803x: mask 1000 Base-X link mode

On Sun, Jun 27, 2021 at 12:16:07PM +0200, David Bauer wrote:
> AR8031/AR8033 have different status registers for copper
> and fiber operation. However, the extended status register
> is the same for both operation modes.
> 
> As a result of that, ESTATUS_1000_XFULL is set to 1 even when
> operating in copper TP mode.
> 
> Remove this mode from the supported link modes, as this driver
> currently only supports copper operation.
> 
> Signed-off-by: David Bauer <mail@...id-bauer.net>

Reviewed-by: Andrew Lunn <andrew@...n.ch>

    Andrew