[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210701163354.118403-1-chris.chiu@canonical.com>
Date: Fri, 2 Jul 2021 00:33:54 +0800
From: chris.chiu@...onical.com
To: Jes.Sorensen@...il.com, kvalo@...eaurora.org, davem@...emloft.net,
kuba@...nel.org, code@...o-schneider.ch
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, Chris Chiu <chris.chiu@...onical.com>
Subject: [PATCH] rtl8xxxu: disable interrupt_in transfer for 8188cu and 8192cu
From: Chris Chiu <chris.chiu@...onical.com>
There will be crazy numbers of interrupts triggered by 8188cu and
8192cu module, around 8000~10000 interrupts per second, on the usb
host controller. Compare with the vendor driver source code, it's
mapping to the configuration CONFIG_USB_INTERRUPT_IN_PIPE and it is
disabled by default.
Since the interrupt transfer is neither used for TX/RX nor H2C
commands. Disable it to avoid the confusing interrupts for the
8188cu and 8192cu module which I only have for verification.
Signed-off-by: Chris Chiu <chris.chiu@...onical.com>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 03c6ed7efe06..6a3dfa71b27f 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -1670,7 +1670,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
priv->rf_paths = 2;
priv->rx_paths = 2;
priv->tx_paths = 2;
- priv->usb_interrupts = 1;
+ priv->usb_interrupts = 0;
priv->rtl_chip = RTL8192C;
}
priv->has_wifi = 1;
@@ -1680,7 +1680,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
priv->rx_paths = 1;
priv->tx_paths = 1;
priv->rtl_chip = RTL8188C;
- priv->usb_interrupts = 1;
+ priv->usb_interrupts = 0;
priv->has_wifi = 1;
}
--
2.20.1
Powered by blists - more mailing lists