[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210719180746.1008665-6-nitesh@redhat.com>
Date: Mon, 19 Jul 2021 14:07:37 -0400
From: Nitesh Narayan Lal <nitesh@...hat.com>
To: linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org,
intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
linux-api@...r.kernel.org, linux-pci@...r.kernel.org,
tglx@...utronix.de, jesse.brandeburg@...el.com,
robin.murphy@....com, mtosatti@...hat.com, mingo@...nel.org,
jbrandeb@...nel.org, frederic@...nel.org, juri.lelli@...hat.com,
abelits@...vell.com, bhelgaas@...gle.com, rostedt@...dmis.org,
peterz@...radead.org, davem@...emloft.net,
akpm@...ux-foundation.org, sfr@...b.auug.org.au,
stephen@...workplumber.org, rppt@...ux.vnet.ibm.com,
chris.friesen@...driver.com, maz@...nel.org, nhorman@...driver.com,
pjwaskiewicz@...il.com, sassmann@...hat.com, thenzl@...hat.com,
kashyap.desai@...adcom.com, sumit.saxena@...adcom.com,
shivasharan.srikanteshwara@...adcom.com,
sathya.prakash@...adcom.com, sreekanth.reddy@...adcom.com,
suganath-prabu.subramani@...adcom.com, james.smart@...adcom.com,
dick.kennedy@...adcom.com, jkc@...hat.com, faisal.latif@...el.com,
shiraz.saleem@...el.com, tariqt@...dia.com, ahleihel@...hat.com,
kheib@...hat.com, borisp@...dia.com, saeedm@...dia.com,
benve@...co.com, govind@....com, jassisinghbrar@...il.com,
ajit.khaparde@...adcom.com, sriharsha.basavapatna@...adcom.com,
somnath.kotur@...adcom.com, nilal@...hat.com,
tatyana.e.nikolova@...el.com, mustafa.ismail@...el.com,
ahs3@...hat.com, leonro@...dia.com,
chandrakanth.patil@...adcom.com, bjorn.andersson@...aro.org,
chunkuang.hu@...nel.org, yongqiang.niu@...iatek.com,
baolin.wang7@...il.com, poros@...hat.com, minlei@...hat.com,
emilne@...hat.com, jejb@...ux.ibm.com, martin.petersen@...cle.com,
_govind@....com, ley.foon.tan@...el.com, kabel@...nel.org,
viresh.kumar@...aro.org, Tushar.Khandelwal@....com,
luobin9@...wei.com
Subject: [PATCH v4 05/14] scsi: mpt3sas: Use irq_set_affinity_and_hint
The driver uses irq_set_affinity_hint() specifically for the high IOPS
queue interrupts for two purposes:
- To set the affinity_hint which is consumed by the userspace for
distributing the interrupts
- To apply an affinity that it provides
The driver enforces its own affinity to bind the high IOPS queue interrupts
to the local NUMA node. However, irq_set_affinity_hint() applying the
provided cpumask as an affinity (if not NULL) for the interrupt is an
undocumented side effect.
To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_set_affinity_and_hint()
where the provided mask needs to be applied as the affinity and
affinity_hint pointer needs to be set and replace with
irq_update_affinity_hint() where only affinity_hint needs to be updated.
Signed-off-by: Nitesh Narayan Lal <nitesh@...hat.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index c39955239d1c..c1a11962f227 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -2991,6 +2991,7 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
static void
_base_free_irq(struct MPT3SAS_ADAPTER *ioc)
{
+ unsigned int irq;
struct adapter_reply_queue *reply_q, *next;
if (list_empty(&ioc->reply_queue_list))
@@ -2998,9 +2999,10 @@ _base_free_irq(struct MPT3SAS_ADAPTER *ioc)
list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
list_del(&reply_q->list);
- if (ioc->smp_affinity_enable)
- irq_set_affinity_hint(pci_irq_vector(ioc->pdev,
- reply_q->msix_index), NULL);
+ if (ioc->smp_affinity_enable) {
+ irq = pci_irq_vector(ioc->pdev, reply_q->msix_index);
+ irq_update_affinity_hint(irq, NULL);
+ }
free_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index),
reply_q);
kfree(reply_q);
@@ -3056,16 +3058,13 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index)
* @ioc: per adapter object
*
* The enduser would need to set the affinity via /proc/irq/#/smp_affinity
- *
- * It would nice if we could call irq_set_affinity, however it is not
- * an exported symbol
*/
static void
_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
{
- unsigned int cpu, nr_cpus, nr_msix, index = 0;
+ unsigned int cpu, nr_cpus, nr_msix, index = 0, irq;
struct adapter_reply_queue *reply_q;
- int local_numa_node;
+ const struct cpumask *mask;
if (!_base_is_controller_msix_enabled(ioc))
return;
@@ -3088,11 +3087,11 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
* corresponding to high iops queues.
*/
if (ioc->high_iops_queues) {
- local_numa_node = dev_to_node(&ioc->pdev->dev);
+ mask = cpumask_of_node(dev_to_node(&ioc->pdev->dev));
for (index = 0; index < ioc->high_iops_queues;
index++) {
- irq_set_affinity_hint(pci_irq_vector(ioc->pdev,
- index), cpumask_of_node(local_numa_node));
+ irq = pci_irq_vector(ioc->pdev, index);
+ irq_set_affinity_and_hint(irq, mask);
}
}
--
2.27.0
Powered by blists - more mailing lists