netdev - Re: [PATCH V2 net-next 1/9] devlink: add documentation for hns3 driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <01c7a657-8454-4b2d-ded9-9212875e5e82@huawei.com>
Date:   Mon, 19 Jul 2021 09:21:28 +0800
From:   "huangguangbin (A)" <huangguangbin2@...wei.com>
To:     Jakub Kicinski <kuba@...nel.org>
CC:     <davem@...emloft.net>, <jiri@...dia.com>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <lipeng321@...wei.com>,
        <chenhao288@...ilicon.com>
Subject: Re: [PATCH V2 net-next 1/9] devlink: add documentation for hns3
 driver



On 2021/7/16 14:00, Jakub Kicinski wrote:
> On Thu, 15 Jul 2021 15:45:02 +0800, Guangbin Huang wrote:
>> From: Hao Chen <chenhao288@...ilicon.com>
>>
>> Add a file to document devlink support for hns3 driver.
>>
>> Now support devlink param and devlink info.
>>
>> Signed-off-by: Hao Chen <chenhao288@...ilicon.com>
>> Signed-off-by: Guangbin Huang <huangguangbin2@...wei.com>
> 
>> +This document describes the devlink features implemented by the ``hns3``
>> +device driver.
>> +
>> +Parameters
>> +==========
>> +
>> +The ``hns3`` driver implements the following driver-specific
>> +parameters.
>> +
>> +.. list-table:: Driver-specific parameters implemented
>> +   :widths: 10 10 10 70
>> +
>> +   * - Name
>> +     - Type
>> +     - Mode
>> +     - Description
>> +   * - ``rx_buf_len``
>> +     - U32
>> +     - driverinit
>> +     - Set rx BD buffer size, now only support setting 2048 and 4096.
>> +
>> +       * The feature is used to change the buffer size of each BD of Rx ring
>> +         between 2KB and 4KB, then do devlink reload operation to take effect.
> 
> Does the reload required here differ from the reload performed when the
> ring size is changed? You can extend the ethtool API, devlink params
> should be used for very vendor specific configuration. Which page
> fragment size very much is not.
>Ok, we will try to extend the ethtool API to implement this feature.
Thanks.

>> +   * - ``tx_buf_size``
>> +     - U32
>> +     - driverinit
>> +     - Set tx bounce buf size.
>> +
>> +       * The size is setted for tx bounce feature. Tx bounce buffer feature is
>> +         used for small size packet or frag. It adds a queue based tx shared
>> +         bounce buffer to memcpy the small packet when the len of xmitted skb is
>> +         below tx_copybreak(value to distinguish small size and normal size),
>> +         and reduce the overhead of dma map and unmap when IOMMU is on.
> 
> IMHO setting the tx_copybreak should be configured thru the same API as
> the size of the buffer it uses. Hence, again, ethtool.
> .
> 
Ok.