lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 19 Jul 2021 15:18:20 +0800
From:   Joakim Zhang <qiangqing.zhang@....com>
To:     davem@...emloft.net, kuba@...nel.org, robh+dt@...nel.org,
        shawnguo@...nel.org, s.hauer@...gutronix.de, festevam@...il.com
Cc:     kernel@...gutronix.de, linux-imx@....com, peppe.cavallaro@...com,
        joabreu@...opsys.com, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH net-next V1 2/3] dt-bindings: net: imx-dwmac: convert imx-dwmac bindings to yaml

In order to automate the verification of DT nodes covert imx-dwmac to
nxp,dwmac-imx.yaml, and pass below checking.

$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml

Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
---
 .../devicetree/bindings/net/imx-dwmac.txt     | 56 -----------
 .../bindings/net/nxp,dwmac-imx.yaml           | 93 +++++++++++++++++++
 2 files changed, 93 insertions(+), 56 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/imx-dwmac.txt
 create mode 100644 Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml

diff --git a/Documentation/devicetree/bindings/net/imx-dwmac.txt b/Documentation/devicetree/bindings/net/imx-dwmac.txt
deleted file mode 100644
index 921d522fe8d7..000000000000
--- a/Documentation/devicetree/bindings/net/imx-dwmac.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-IMX8 glue layer controller, NXP imx8 families support Synopsys MAC 5.10a IP.
-
-This file documents platform glue layer for IMX.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible:  Should be "nxp,imx8mp-dwmac-eqos" to select glue layer
-	       and "snps,dwmac-5.10a" to select IP version.
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: Should be "stmmaceth" for the host clock.
-	       Should be "pclk" for the MAC apb clock.
-	       Should be "ptp_ref" for the MAC timer clock.
-	       Should be "tx" for the MAC RGMII TX clock:
-	       Should be "mem" for EQOS MEM clock.
-		- "mem" clock is required for imx8dxl platform.
-		- "mem" clock is not required for imx8mp platform.
-- interrupt-names: Should contain a list of interrupt names corresponding to
-		   the interrupts in the interrupts property, if available.
-		   Should be "macirq" for the main MAC IRQ
-		   Should be "eth_wake_irq" for the IT which wake up system
-- intf_mode: Should be phandle/offset pair. The phandle to the syscon node which
-	     encompases the GPR register, and the offset of the GPR register.
-		- required for imx8mp platform.
-		- is optional for imx8dxl platform.
-
-Optional properties:
-- intf_mode: is optional for imx8dxl platform.
-- snps,rmii_refclk_ext: to select RMII reference clock from external.
-
-Example:
-	eqos: ethernet@...f0000 {
-		compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
-		reg = <0x30bf0000 0x10000>;
-		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "eth_wake_irq", "macirq";
-		clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
-			 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
-			 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
-			 <&clk IMX8MP_CLK_ENET_QOS>;
-		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
-		assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
-				  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
-				  <&clk IMX8MP_CLK_ENET_QOS>;
-		assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
-					 <&clk IMX8MP_SYS_PLL2_100M>,
-					 <&clk IMX8MP_SYS_PLL2_125M>;
-		assigned-clock-rates = <0>, <100000000>, <125000000>;
-		nvmem-cells = <&eth_mac0>;
-		nvmem-cell-names = "mac-address";
-		nvmem_macaddr_swap;
-		intf_mode = <&gpr 0x4>;
-		status = "disabled";
-	};
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
new file mode 100644
index 000000000000..5629b2e4ccf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
+
+maintainers:
+  - Joakim Zhang <qiangqing.zhang@....com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nxp,imx8mp-dwmac-eqos
+          - nxp,imx8dxl-dwmac-eqos
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nxp,imx8mp-dwmac-eqos
+              - nxp,imx8dxl-dwmac-eqos
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+    items:
+      - description: MAC host clock
+      - description: MAC apb clock
+      - description: MAC timer clock
+      - description: MAC RGMII TX clock
+      - description: EQOS MEM clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+    contains:
+      enum:
+        - stmmaceth
+        - pclk
+        - ptp_ref
+        - tx
+        - mem
+
+  intf_mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the GPR register, and the offset of the GPR register.
+
+  snps,rmii_refclk_ext:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      To select RMII reference clock from external.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    eqos: ethernet@...f0000 {
+            compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
+            reg = <0x30bf0000 0x10000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq", "eth_wake_irq";
+            clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+                     <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+                     <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+                     <&clk IMX8MP_CLK_ENET_QOS>;
+            clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+            phy-mode = "rgmii";
+            status = "disabled";
+    };
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ