| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 20 Jul 2021 14:38:20 +0100
From: Russell King <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
"Marek Beh__n" <kabel@...nel.org>, Jakub Kicinski <kuba@...nel.org>
Subject: [PATCH RFC net-next] net: phy: marvell10g: add downshift tunable support
Add support for the downshift tunable for the Marvell 88x3310 PHY.
Downshift is only usable with firmware 0.3.5.0 and later.
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
It would be useful to have views on the "FIXME" comment in this patch
please. Thanks.
drivers/net/phy/marvell10g.c | 87 +++++++++++++++++++++++++++++++++++-
1 file changed, 86 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 0b7cae118ad7..0c9e7e1fab91 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -22,6 +22,7 @@
* If both the fiber and copper ports are connected, the first to gain
* link takes priority and the other port is completely locked out.
*/
+#include <linux/bitfield.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/hwmon.h>
@@ -33,6 +34,8 @@
#define MV_PHY_ALASKA_NBT_QUIRK_MASK 0xfffffffe
#define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa)
+#define MV_VERSION(a,b,c,d) ((a) << 24 | (b) << 16 | (c) << 8 | (d))
+
enum {
MV_PMA_FW_VER0 = 0xc011,
MV_PMA_FW_VER1 = 0xc012,
@@ -62,6 +65,15 @@ enum {
MV_PCS_CSCR1_MDIX_MDIX = 0x0020,
MV_PCS_CSCR1_MDIX_AUTO = 0x0060,
+ MV_PCS_DSC1 = 0x8003,
+ MV_PCS_DSC1_ENABLE = BIT(9),
+ MV_PCS_DSC1_10GBT = 0x01c0,
+ MV_PCS_DSC1_1GBR = 0x0038,
+ MV_PCS_DSC1_100BTX = 0x0007,
+ MV_PCS_DSC2 = 0x8004,
+ MV_PCS_DSC2_2P5G = 0xf000,
+ MV_PCS_DSC2_5G = 0x0f00,
+
MV_PCS_CSSR1 = 0x8008,
MV_PCS_CSSR1_SPD1_MASK = 0xc000,
MV_PCS_CSSR1_SPD1_SPD2 = 0xc000,
@@ -330,6 +342,66 @@ static int mv3310_reset(struct phy_device *phydev, u32 unit)
5000, 100000, true);
}
+static int mv3310_get_downshift(struct phy_device *phydev, u8 *ds)
+{
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+ int val;
+
+ if (priv->firmware_ver < MV_VERSION(0,3,5,0))
+ return -EOPNOTSUPP;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1);
+ if (val < 0)
+ return val;
+
+ if (val & MV_PCS_DSC1_ENABLE)
+ /* assume that all fields are the same */
+ *ds = 1 + FIELD_GET(MV_PCS_DSC1_10GBT, (u16)val);
+ else
+ *ds = DOWNSHIFT_DEV_DISABLE;
+
+ return 0;
+}
+
+static int mv3310_set_downshift(struct phy_device *phydev, u8 ds)
+{
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+ u16 val;
+ int err;
+
+ /* Fails to downshift with v0.3.5.0 and earlier */
+ if (priv->firmware_ver < MV_VERSION(0,3,5,0))
+ return -EOPNOTSUPP;
+
+ if (ds == DOWNSHIFT_DEV_DISABLE)
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1,
+ MV_PCS_DSC1_ENABLE);
+
+ /* FIXME: The default is disabled, so should we disable? */
+ if (ds == DOWNSHIFT_DEV_DEFAULT_COUNT)
+ ds = 2;
+
+ if (ds > 8)
+ return -E2BIG;
+
+ ds -= 1;
+ val = FIELD_PREP(MV_PCS_DSC2_2P5G, ds);
+ val |= FIELD_PREP(MV_PCS_DSC2_5G, ds);
+ err = phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC2,
+ MV_PCS_DSC2_2P5G | MV_PCS_DSC2_5G, val);
+ if (err < 0)
+ return err;
+
+ val = MV_PCS_DSC1_ENABLE;
+ val |= FIELD_PREP(MV_PCS_DSC1_10GBT, ds);
+ val |= FIELD_PREP(MV_PCS_DSC1_1GBR, ds);
+ val |= FIELD_PREP(MV_PCS_DSC1_100BTX, ds);
+
+ return phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1,
+ MV_PCS_DSC1_ENABLE | MV_PCS_DSC1_10GBT |
+ MV_PCS_DSC1_1GBR | MV_PCS_DSC1_100BTX, val);
+}
+
static int mv3310_get_edpd(struct phy_device *phydev, u16 *edpd)
{
int val;
@@ -616,7 +688,16 @@ static int mv3310_config_init(struct phy_device *phydev)
}
/* Enable EDPD mode - saving 600mW */
- return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
+ err = mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
+ if (err)
+ return err;
+
+ /* Allow downshift */
+ err = mv3310_set_downshift(phydev, DOWNSHIFT_DEV_DEFAULT_COUNT);
+ if (err && err != -EOPNOTSUPP)
+ return err;
+
+ return 0;
}
static int mv3310_get_features(struct phy_device *phydev)
@@ -886,6 +967,8 @@ static int mv3310_get_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, void *data)
{
switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return mv3310_get_downshift(phydev, data);
case ETHTOOL_PHY_EDPD:
return mv3310_get_edpd(phydev, data);
default:
@@ -897,6 +980,8 @@ static int mv3310_set_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, const void *data)
{
switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return mv3310_set_downshift(phydev, *(u8 *)data);
case ETHTOOL_PHY_EDPD:
return mv3310_set_edpd(phydev, *(u16 *)data);
default:
--
2.20.1
Powered by blists - more mailing lists