netdev - Re: [PATCH v2 7/7] dt-bindings: adin1100: Add binding for ADIN1100 Ethernet PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 27 Jul 2021 07:53:29 +0200
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     alexandru.tachici@...log.com
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, robh+dt@...nel.org, andrew@...n.ch,
        hkallweit1@...il.com, linux@...linux.org.uk, davem@...emloft.net,
        kuba@...nel.org
Subject: Re: [PATCH v2 7/7] dt-bindings: adin1100: Add binding for ADIN1100
 Ethernet PHY

On Mon, Jul 12, 2021 at 04:06:31PM +0300, alexandru.tachici@...log.com wrote:
> From: Alexandru Tachici <alexandru.tachici@...log.com>
> 
> DT bindings for the ADIN1100 10BASE-T1L Ethernet PHY.
> 
> Signed-off-by: Alexandru Tachici <alexandru.tachici@...log.com>
> ---
>  .../devicetree/bindings/net/adi,adin1100.yaml | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/adi,adin1100.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/adi,adin1100.yaml b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
> new file mode 100644
> index 000000000000..14943164da7a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/adi,adin1100.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADIN1100 PHY
> +
> +maintainers:
> +  - Alexandru Tachici <alexandru.tachici@...log.com>
> +
> +description:
> +  Bindings for Analog Devices Industrial Low Power 10BASE-T1L Ethernet PHY
> +
> +allOf:
> +  - $ref: ethernet-phy.yaml#
> +
> +properties:
> +  adi,disable-2400mv-tx-level:
> +    description:
> +      Prevent ADIN1100 from using the 2.4 V pk-pk transmit level.
> +    type: boolean

This property should be generic. It is defined by IEEE 802.3cg 2019 and can
be implemented on all T1L PHYs.

I assume, it should be something like:
ethernet-phy-10base-t1l-2.4vpp-enable
ethernet-phy-10base-t1l-2.4vpp-disable

To overwrite bootstrapped of fuzed values if supported. The IEEE 802.3cg
specification uses following wordings for this functionality:
"10BASE-T1L increased transmit level request ..."

"146.5.4.1 Transmitter output voltage
When tested with the test fixture shown in Figure 146–20 with the transmitter
in test mode 1, the transmitter output voltage shall be 2.4 V + 5%/ – 15%
peak-to-peak (for the 2.4 Vpp operating mode) and 1.0 V + 5%/ – 15%
peak-to-peak (for the 1.0 Vpp operating mode). Transmitter output
voltage can be set using the management interface or by hardware default set-up."

I would recommend to use similar wording if possible.


> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    ethernet@...0c000 {
> +            compatible = "cdns,zynq-gem", "cdns,gem";
> +            reg = <0xe000c000 0x1000>;
> +            status = "okay";
> +            phy-mode = "mii";
> +            interrupts = <0 45 4>;
> +            clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
> +            clock-names = "pclk", "hclk", "tx_clk";
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            ethernet-phy@0 {
> +                    reg = <0>;
> +                    device_type = "ethernet-phy";
> +                    adi,disable-2400mv-tx-level;
> +            };
> +
> +    };
> -- 
> 2.25.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |