[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210729125358.5227-1-luoj@codeaurora.org>
Date: Thu, 29 Jul 2021 20:53:56 +0800
From: Luo Jie <luoj@...eaurora.org>
To: andrew@...n.ch, hkallweit1@...il.com, davem@...emloft.net,
kuba@...nel.org, p.zabel@...gutronix.de, agross@...nel.org,
bjorn.andersson@...aro.org, robh+dt@...nel.org,
robert.marko@...tura.hr
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
sricharan@...eaurora.org, Luo Jie <luoj@...eaurora.org>
Subject: [PATCH 1/3] net: mdio-ipq4019: Add mdio reset function
Support PHY reset function and MDIO clock frequency configuration.
Signed-off-by: Luo Jie <luoj@...eaurora.org>
---
drivers/net/mdio/Kconfig | 1 +
drivers/net/mdio/mdio-ipq4019.c | 71 +++++++++++++++++++++++++++++++++
2 files changed, 72 insertions(+)
diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
index 99a6c13a11af..06a605ffb950 100644
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
@@ -169,6 +169,7 @@ config MDIO_OCTEON
config MDIO_IPQ4019
tristate "Qualcomm IPQ4019 MDIO interface support"
depends on HAS_IOMEM && OF_MDIO
+ depends on GPIOLIB && COMMON_CLK && RESET_CONTROLLER
help
This driver supports the MDIO interface found in Qualcomm
IPQ40xx series Soc-s.
diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c
index 9cd71d896963..01f5b9393537 100644
--- a/drivers/net/mdio/mdio-ipq4019.c
+++ b/drivers/net/mdio/mdio-ipq4019.c
@@ -11,6 +11,9 @@
#include <linux/of_mdio.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
#define MDIO_MODE_REG 0x40
#define MDIO_ADDR_REG 0x44
@@ -31,8 +34,16 @@
#define IPQ4019_MDIO_TIMEOUT 10000
#define IPQ4019_MDIO_SLEEP 10
+/* MDIO clock source frequency is fixed to 100M */
+#define QCA_MDIO_CLK_RATE 100000000
+
+#define QCA_PHY_SET_DELAY_US 100000
+
struct ipq4019_mdio_data {
void __iomem *membase;
+ void __iomem *eth_ldo_rdy;
+ struct reset_control *reset_ctrl;
+ struct clk *mdio_clk;
};
static int ipq4019_mdio_wait_busy(struct mii_bus *bus)
@@ -171,10 +182,61 @@ static int ipq4019_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
return 0;
}
+static int ipq_mdio_reset(struct mii_bus *bus)
+{
+ struct ipq4019_mdio_data *priv = bus->priv;
+ struct device *dev = bus->parent;
+ struct gpio_desc *reset_gpio;
+ u32 val;
+ int i, ret;
+
+ /* To indicate CMN_PLL that ethernet_ldo has been ready if needed */
+ if (!IS_ERR(priv->eth_ldo_rdy)) {
+ val = readl(priv->eth_ldo_rdy);
+ val |= BIT(0);
+ writel(val, priv->eth_ldo_rdy);
+ fsleep(QCA_PHY_SET_DELAY_US);
+ }
+
+ /* Reset GEPHY if need */
+ if (!IS_ERR(priv->reset_ctrl)) {
+ reset_control_assert(priv->reset_ctrl);
+ fsleep(QCA_PHY_SET_DELAY_US);
+ reset_control_deassert(priv->reset_ctrl);
+ fsleep(QCA_PHY_SET_DELAY_US);
+ }
+
+ /* Configure MDIO clock frequency */
+ if (!IS_ERR(priv->mdio_clk)) {
+ ret = clk_set_rate(priv->mdio_clk, QCA_MDIO_CLK_RATE);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(priv->mdio_clk);
+ if (ret)
+ return ret;
+ }
+
+ /* Reset PHYs by gpio pins */
+ for (i = 0; i < gpiod_count(dev, "phy-reset"); i++) {
+ reset_gpio = gpiod_get_index_optional(dev, "phy-reset", i, GPIOD_OUT_HIGH);
+ if (IS_ERR(reset_gpio))
+ continue;
+ gpiod_set_value_cansleep(reset_gpio, 0);
+ fsleep(QCA_PHY_SET_DELAY_US);
+ gpiod_set_value_cansleep(reset_gpio, 1);
+ fsleep(QCA_PHY_SET_DELAY_US);
+ gpiod_put(reset_gpio);
+ }
+
+ return 0;
+}
+
static int ipq4019_mdio_probe(struct platform_device *pdev)
{
struct ipq4019_mdio_data *priv;
struct mii_bus *bus;
+ struct resource *res;
int ret;
bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv));
@@ -182,14 +244,23 @@ static int ipq4019_mdio_probe(struct platform_device *pdev)
return -ENOMEM;
priv = bus->priv;
+ priv->eth_ldo_rdy = IOMEM_ERR_PTR(-EINVAL);
priv->membase = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->membase))
return PTR_ERR(priv->membase);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res)
+ priv->eth_ldo_rdy = devm_ioremap_resource(&pdev->dev, res);
+
+ priv->reset_ctrl = devm_reset_control_get_exclusive(&pdev->dev, "gephy_mdc_rst");
+ priv->mdio_clk = devm_clk_get(&pdev->dev, "gcc_mdio_ahb_clk");
+
bus->name = "ipq4019_mdio";
bus->read = ipq4019_mdio_read;
bus->write = ipq4019_mdio_write;
+ bus->reset = ipq_mdio_reset;
bus->parent = &pdev->dev;
snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists