netdev - [PATCH mlx5-next 06/14] net/mlx5: E-Switch, set flow source for send to uplink rule

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210803231959.26513-7-saeed@kernel.org>
Date:   Tue,  3 Aug 2021 16:19:51 -0700
From:   Saeed Mahameed <saeed@...nel.org>
To:     Saeed Mahameed <saeedm@...dia.com>,
        Leon Romanovsky <leonro@...dia.com>
Cc:     netdev@...r.kernel.org, linux-rdma@...r.kernel.org,
        Ariel Levkovich <lariel@...dia.com>,
        Roi Dayan <roid@...dia.com>
Subject: [PATCH mlx5-next 06/14] net/mlx5: E-Switch, set flow source for send to uplink rule

From: Ariel Levkovich <lariel@...dia.com>

Set the flow source param to local vport for the uplink rep
send-to-vport rule.

This will comply with the recent changes in SW steering that
use the flow source as an indication for the rule type - rx or tx.

Since the uplink send-to-vport rule is forwarding traffic to the wire
it has to indicate that it is an sx rule and can't use the any port
value in the flow source.

Signed-off-by: Ariel Levkovich <lariel@...dia.com>
Reviewed-by: Roi Dayan <roid@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 12567002997f..1735be77e1fd 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -963,6 +963,9 @@ mlx5_eswitch_add_send_to_vport_rule(struct mlx5_eswitch *on_esw,
 	dest.vport.flags |= MLX5_FLOW_DEST_VPORT_VHCA_ID;
 	flow_act.action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
 
+	if (rep->vport == MLX5_VPORT_UPLINK)
+		spec->flow_context.flow_source = MLX5_FLOW_CONTEXT_FLOW_SOURCE_LOCAL_VPORT;
+
 	flow_rule = mlx5_add_flow_rules(on_esw->fdb_table.offloads.slow_fdb,
 					spec, &flow_act, &dest, 1);
 	if (IS_ERR(flow_rule))
-- 
2.31.1