| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 4 Aug 2021 19:05:25 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Dongdong Liu <liudongdong3@...wei.com>
Cc: hch@...radead.org, kw@...ux.com, logang@...tatee.com,
leon@...nel.org, linux-pci@...r.kernel.org, rajur@...lsio.com,
hverkuil-cisco@...all.nl, linux-media@...r.kernel.org,
netdev@...r.kernel.org
Subject: Re: [PATCH V7 8/9] PCI/IOV: Add 10-Bit Tag sysfs files for VF devices
On Wed, Aug 04, 2021 at 09:47:07PM +0800, Dongdong Liu wrote:
> PCIe spec 5.0 r1.0 section 2.2.6.2 says that if an Endpoint supports
> sending Requests to other Endpoints (as opposed to host memory), the
> Endpoint must not send 10-Bit Tag Requests to another given Endpoint
> unless an implementation-specific mechanism determines that the
> Endpoint supports 10-Bit Tag Completer capability.
> Add sriov_vf_10bit_tag file to query the status of VF 10-Bit Tag
> Requester Enable. Add sriov_vf_10bit_tag_ctl file to disable the VF
> 10-Bit Tag Requester. The typical use case is for p2pdma when the peer
> device does not support 10-BIT Tag Completer.
Fix the usual spec quoting issue. Or maybe this is not actually
quoted but is missing blank lines between paragraphs.
s/10-BIT/10-Bit/
> Signed-off-by: Dongdong Liu <liudongdong3@...wei.com>
> ---
> Documentation/ABI/testing/sysfs-bus-pci | 20 +++++++++++++
> drivers/pci/iov.c | 50 +++++++++++++++++++++++++++++++++
> 2 files changed, 70 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
> index 0e0c97d..8fdbfae 100644
> --- a/Documentation/ABI/testing/sysfs-bus-pci
> +++ b/Documentation/ABI/testing/sysfs-bus-pci
> @@ -421,3 +421,23 @@ Description:
> to disable 10-Bit Tag Requester when the driver does not bind
> the deivce. The typical use case is for p2pdma when the peer
> device does not support 10-BIT Tag Completer.
> +
> +What: /sys/bus/pci/devices/.../sriov_vf_10bit_tag
> +Date: August 2021
> +Contact: Dongdong Liu <liudongdong3@...wei.com>
> +Description:
> + This file is associated with a SR-IOV physical function (PF).
> + It is visible when the device has VF 10-Bit Tag Requester
> + Supported. It contains the status of VF 10-Bit Tag Requester
> + Enable. The file is only readable.
s/only readable/read-only/
> +What: /sys/bus/pci/devices/.../sriov_vf_10bit_tag_ctl
Why does this file have "_ctl" on the end when the one in patch 7/9
does not?
> +Date: August 2021
> +Contact: Dongdong Liu <liudongdong3@...wei.com>
> +Description:
> + This file is associated with a SR-IOV virtual function (VF).
> + It is visible when the device has VF 10-Bit Tag Requester
> + Supported. It only allows to write 0 to disable VF 10-Bit
> + Tag Requester. The file is only writeable when the vf driver
> + does not bind to a dirver. The typical use case is for p2pdma
> + when the peer device does not support 10-BIT Tag Completer.
s/vf/VF/
s/dirver/driver/
s/10-BIT/10-Bit/
"when the vr driver does not bind to a driver"? Not quite right.
Must be a "device" in there somewhere.
So IIUC this file is associated with a VF, but the bit it writes is
actually in the *PF*? So writing 0 to any VF's file disables 10-bit
tags for *all* VFs? That's worth mentioning here.
> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> index 0d0bed1..04c1298 100644
> --- a/drivers/pci/iov.c
> +++ b/drivers/pci/iov.c
> @@ -220,10 +220,38 @@ static ssize_t sriov_vf_msix_count_store(struct device *dev,
> static DEVICE_ATTR_WO(sriov_vf_msix_count);
> #endif
>
> +static ssize_t sriov_vf_10bit_tag_ctl_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct pci_dev *vf_dev = to_pci_dev(dev);
> + struct pci_dev *pdev = pci_physfn(vf_dev);
> + struct pci_sriov *iov;
> + bool enable;
> +
> + if (kstrtobool(buf, &enable) < 0)
> + return -EINVAL;
> +
> + if (enable != false)
> + return -EINVAL;
Is this "if (enable)" again?
> + if (vf_dev->driver)
> + return -EBUSY;
> +
> + iov = pdev->sriov;
> + iov->ctrl &= ~PCI_SRIOV_CTRL_VF_10BIT_TAG_REQ_EN;
> + pci_write_config_word(pdev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
> + pci_info(pdev, "disabled SRIOV 10-Bit Tag Requester\n");
s/SRIOV/SR-IOV/ to match spec and other usages.
> +
> + return count;
> +}
> +static DEVICE_ATTR_WO(sriov_vf_10bit_tag_ctl);
> +
> static struct attribute *sriov_vf_dev_attrs[] = {
> #ifdef CONFIG_PCI_MSI
> &dev_attr_sriov_vf_msix_count.attr,
> #endif
> + &dev_attr_sriov_vf_10bit_tag_ctl.attr,
> NULL,
> };
>
> @@ -236,6 +264,11 @@ static umode_t sriov_vf_attrs_are_visible(struct kobject *kobj,
> if (!pdev->is_virtfn)
> return 0;
>
> + pdev = pci_physfn(pdev);
> + if ((a == &dev_attr_sriov_vf_10bit_tag_ctl.attr) &&
> + !(pdev->sriov->cap & PCI_SRIOV_CAP_VF_10BIT_TAG_REQ))
> + return 0;
> +
> return a->mode;
> }
>
> @@ -487,12 +520,23 @@ static ssize_t sriov_drivers_autoprobe_store(struct device *dev,
> return count;
> }
>
> +static ssize_t sriov_vf_10bit_tag_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> +
> + return sysfs_emit(buf, "%u\n",
> + !!(pdev->sriov->ctrl & PCI_SRIOV_CTRL_VF_10BIT_TAG_REQ_EN));
> +}
> +
> static DEVICE_ATTR_RO(sriov_totalvfs);
> static DEVICE_ATTR_RW(sriov_numvfs);
> static DEVICE_ATTR_RO(sriov_offset);
> static DEVICE_ATTR_RO(sriov_stride);
> static DEVICE_ATTR_RO(sriov_vf_device);
> static DEVICE_ATTR_RW(sriov_drivers_autoprobe);
> +static DEVICE_ATTR_RO(sriov_vf_10bit_tag);
>
> static struct attribute *sriov_pf_dev_attrs[] = {
> &dev_attr_sriov_totalvfs.attr,
> @@ -501,6 +545,7 @@ static struct attribute *sriov_pf_dev_attrs[] = {
> &dev_attr_sriov_stride.attr,
> &dev_attr_sriov_vf_device.attr,
> &dev_attr_sriov_drivers_autoprobe.attr,
> + &dev_attr_sriov_vf_10bit_tag.attr,
> #ifdef CONFIG_PCI_MSI
> &dev_attr_sriov_vf_total_msix.attr,
> #endif
> @@ -511,10 +556,15 @@ static umode_t sriov_pf_attrs_are_visible(struct kobject *kobj,
> struct attribute *a, int n)
> {
> struct device *dev = kobj_to_dev(kobj);
> + struct pci_dev *pdev = to_pci_dev(dev);
>
> if (!dev_is_pf(dev))
> return 0;
>
> + if ((a == &dev_attr_sriov_vf_10bit_tag.attr) &&
> + !(pdev->sriov->cap & PCI_SRIOV_CAP_VF_10BIT_TAG_REQ))
> + return 0;
> +
> return a->mode;
> }
>
> --
> 2.7.4
>
Powered by blists - more mailing lists