lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Sun, 8 Aug 2021 17:11:32 +0200
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Jakub Kicinski <kuba@...nel.org>,
        David Miller <davem@...emloft.net>,
        Realtek linux nic maintainers <nic_swsd@...ltek.com>
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH net-next] r8169: rename rtl_csi_access_enable to
 rtl_set_aspm_entry_latency

On 08.08.2021 15:06, Heiner Kallweit wrote:
> Rename the function to reflect what it's doing. Also add a description
> of the register values as kindly provided by Realtek.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>

Just saw that the original patch was applied on net. Therefore this one
will apply only once net is merged to net-next. 

> ---
>  drivers/net/ethernet/realtek/r8169_main.c | 11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index 2c643ec36..7a69b4685 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -2598,7 +2598,7 @@ static u32 rtl_csi_read(struct rtl8169_private *tp, int addr)
>  		RTL_R32(tp, CSIDR) : ~0;
>  }
>  
> -static void rtl_csi_access_enable(struct rtl8169_private *tp, u8 val)
> +static void rtl_set_aspm_entry_latency(struct rtl8169_private *tp, u8 val)
>  {
>  	struct pci_dev *pdev = tp->pci_dev;
>  	u32 csi;
> @@ -2606,6 +2606,8 @@ static void rtl_csi_access_enable(struct rtl8169_private *tp, u8 val)
>  	/* According to Realtek the value at config space address 0x070f
>  	 * controls the L0s/L1 entrance latency. We try standard ECAM access
>  	 * first and if it fails fall back to CSI.
> +	 * bit 0..2: L0: 0 = 1us, 1 = 2us .. 6 = 7us, 7 = 7us (no typo)
> +	 * bit 3..5: L1: 0 = 1us, 1 = 2us .. 6 = 64us, 7 = 64us
>  	 */
>  	if (pdev->cfg_size > 0x070f &&
>  	    pci_write_config_byte(pdev, 0x070f, val) == PCIBIOS_SUCCESSFUL)
> @@ -2619,7 +2621,8 @@ static void rtl_csi_access_enable(struct rtl8169_private *tp, u8 val)
>  
>  static void rtl_set_def_aspm_entry_latency(struct rtl8169_private *tp)
>  {
> -	rtl_csi_access_enable(tp, 0x27);
> +	/* L0 7us, L1 16us */
> +	rtl_set_aspm_entry_latency(tp, 0x27);
>  }
>  
>  struct ephy_info {
> @@ -3502,8 +3505,8 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp)
>  	RTL_W8(tp, MCU, RTL_R8(tp, MCU) | EN_NDP | EN_OOB_RESET);
>  	RTL_W8(tp, DLLPR, RTL_R8(tp, DLLPR) & ~PFM_EN);
>  
> -	/* The default value is 0x13. Change it to 0x2f */
> -	rtl_csi_access_enable(tp, 0x2f);
> +	/* L0 7us, L1 32us - needed to avoid issues with link-up detection */
> +	rtl_set_aspm_entry_latency(tp, 0x2f);
>  
>  	rtl_eri_write(tp, 0x1d0, ERIAR_MASK_0011, 0x0000);
>  
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ