netdev - [PATCH net-next 0/2] Convert ocelot to phylink

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210815005622.1215653-1-vladimir.oltean@nxp.com>
Date:   Sun, 15 Aug 2021 03:56:20 +0300
From:   Vladimir Oltean <vladimir.oltean@....com>
To:     netdev@...r.kernel.org, Jakub Kicinski <kuba@...nel.org>,
        "David S. Miller" <davem@...emloft.net>
Cc:     Russell King <linux@...linux.org.uk>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Horatiu Vultur <horatiu.vultur@...rochip.com>,
        Colin Foster <colin.foster@...advantage.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Claudiu Manoil <claudiu.manoil@....com>,
        UNGLinuxDriver@...rochip.com
Subject: [PATCH net-next 0/2] Convert ocelot to phylink

The ocelot switchdev and felix dsa drivers are interesting because they
target the same class of hardware switches but used in different modes.

Colin has an interesting use case where he wants to use a hardware
switch supported by the ocelot switchdev driver with the felix dsa
driver.

So far, the existing hardware revisions were similar between the ocelot
and felix drivers, but not completely identical. With identical hardware,
it is absurd that the felix driver uses phylink while the ocelot driver
uses phylib - this should not be one of the differences between the
switchdev and dsa driver, and we could eliminate it.

Colin will need the common phylink support in ocelot and felix when
adding a phylink_pcs driver for the PCS1G block inside VSC7514, which
will make the felix driver work with either the NXP or the Microchip PCS.

As usual, Alex, Horatiu, sorry for bugging you, but it would be
appreciated if you could give this a quick run on actual VSC7514
hardware (which I don't have) to make sure I'm not introducing any
breakage.

Vladimir Oltean (2):
  net: dsa: felix: stop calling ocelot_port_{enable,disable}
  net: mscc: ocelot: convert to phylink

 drivers/net/dsa/ocelot/felix.c             | 109 +--------
 drivers/net/dsa/ocelot/felix.h             |   1 +
 drivers/net/ethernet/mscc/Kconfig          |   2 +-
 drivers/net/ethernet/mscc/ocelot.c         | 174 ++++++++------
 drivers/net/ethernet/mscc/ocelot.h         |  11 +-
 drivers/net/ethernet/mscc/ocelot_net.c     | 254 +++++++++++++++++----
 drivers/net/ethernet/mscc/ocelot_vsc7514.c |  59 +----
 include/soc/mscc/ocelot.h                  |  21 +-
 8 files changed, 339 insertions(+), 292 deletions(-)

-- 
2.25.1