| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1629167767-7550-1-git-send-email-moyufeng@huawei.com>
Date: Tue, 17 Aug 2021 10:36:03 +0800
From: Yufeng Mo <moyufeng@...wei.com>
To: <davem@...emloft.net>, <kuba@...nel.org>
CC: <netdev@...r.kernel.org>, <shenjian15@...wei.com>,
<lipeng321@...wei.com>, <yisen.zhuang@...wei.com>,
<linyunsheng@...wei.com>, <huangguangbin2@...wei.com>,
<chenhao288@...ilicon.com>, <salil.mehta@...wei.com>,
<moyufeng@...wei.com>, <linuxarm@...wei.com>,
<linuxarm@...neuler.org>, <dledford@...hat.com>, <jgg@...pe.ca>,
<netanel@...zon.com>, <akiyano@...zon.com>,
<thomas.lendacky@....com>, <irusskikh@...vell.com>,
<michael.chan@...adcom.com>, <edwin.peer@...adcom.com>,
<rohitm@...lsio.com>, <jacob.e.keller@...el.com>,
<ioana.ciornei@....com>, <vladimir.oltean@....com>,
<sgoutham@...vell.com>, <sbhatta@...vell.com>, <saeedm@...dia.com>,
<ecree.xilinx@...il.com>, <grygorii.strashko@...com>,
<merez@...eaurora.org>, <kvalo@...eaurora.org>,
<linux-wireless@...r.kernel.org>
Subject: [PATCH net-next 0/4] ethtool: extend coalesce uAPI
In order to support some configuration in coalesce uAPI, this RFC
extends coalesce uAPI and add support for CQE mode.
Below is some test result with HNS3 driver:
1. old ethtool(ioctl) + new kernel:
estuary:/$ ethtool -c eth0
Coalesce parameters for eth0:
Adaptive RX: on TX: on
stats-block-usecs: 0
sample-interval: 0
pkt-rate-low: 0
pkt-rate-high: 0
rx-usecs: 20
rx-frames: 0
rx-usecs-irq: 0
rx-frames-irq: 0
tx-usecs: 20
tx-frames: 0
tx-usecs-irq: 0
tx-frames-irq: 0
rx-usecs-low: 0
rx-frame-low: 0
tx-usecs-low: 0
tx-frame-low: 0
rx-usecs-high: 0
rx-frame-high: 0
tx-usecs-high: 0
tx-frame-high: 0
2. ethtool(netlink with cqe mode) + kernel without cqe mode:
estuary:/$ ethtool -c eth0
Coalesce parameters for eth0:
Adaptive RX: on TX: on
stats-block-usecs: n/a
sample-interval: n/a
pkt-rate-low: n/a
pkt-rate-high: n/a
rx-usecs: 20
rx-frames: 0
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 20
tx-frames: 0
tx-usecs-irq: n/a
tx-frames-irq: n/a
rx-usecs-low: n/a
rx-frame-low: n/a
tx-usecs-low: n/a
tx-frame-low: n/a
rx-usecs-high: 0
rx-frame-high: n/a
tx-usecs-high: 0
tx-frame-high: n/a
CQE mode RX: n/a TX: n/a
3. ethool(netlink with cqe mode) + kernel with cqe mode:
estuary:/$ ethtool -c eth0
Coalesce parameters for eth0:
Adaptive RX: on TX: on
stats-block-usecs: n/a
sample-interval: n/a
pkt-rate-low: n/a
pkt-rate-high: n/a
rx-usecs: 20
rx-frames: 0
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 20
tx-frames: 0
tx-usecs-irq: n/a
tx-frames-irq: n/a
rx-usecs-low: n/a
rx-frame-low: n/a
tx-usecs-low: n/a
tx-frame-low: n/a
rx-usecs-high: 0
rx-frame-high: n/a
tx-usecs-high: 0
tx-frame-high: n/a
CQE mode RX: off TX: off
4. ethool(netlink without cqe mode) + kernel with cqe mode:
estuary:/$ ethtool -c eth0
Coalesce parameters for eth0:
Adaptive RX: on TX: on
stats-block-usecs: n/a
sample-interval: n/a
pkt-rate-low: n/a
pkt-rate-high: n/a
rx-usecs: 20
rx-frames: 0
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 20
tx-frames: 0
tx-usecs-irq: n/a
tx-frames-irq: n/a
rx-usecs-low: n/a
rx-frame-low: n/a
tx-usecs-low: n/a
tx-frame-low: n/a
rx-usecs-high: 0
rx-frame-high: n/a
tx-usecs-high: 0
tx-frame-high: n/a
Change log from RFC:
V3 -> V4:
add document explaining the difference between CQE and EQE
in #1 suggested by Jakub Kicinski.
V2 -> V3:
1. split #1 into adding new parameter and adding new attributes.
2. use NLA_POLICY_MAX(NLA_U8, 1) instead of NLA_U8.
3. modify the description of CQE in Document.
V1 -> V2:
refactor #1 in V1 suggestted by Jakub Kicinski.
Yufeng Mo (4):
ethtool: add two coalesce attributes for CQE mode
ethtool: extend coalesce setting uAPI with CQE mode
net: hns3: add support for EQE/CQE mode configuration
net: hns3: add ethtool support for CQE/EQE mode configuration
Documentation/networking/ethtool-netlink.rst | 15 +++++++
drivers/infiniband/ulp/ipoib/ipoib_ethtool.c | 8 +++-
drivers/net/ethernet/amazon/ena/ena_ethtool.c | 8 +++-
drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 8 +++-
.../net/ethernet/aquantia/atlantic/aq_ethtool.c | 8 +++-
drivers/net/ethernet/broadcom/bcmsysport.c | 8 +++-
drivers/net/ethernet/broadcom/bnx2.c | 12 ++++--
.../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 8 +++-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 +++-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +++-
drivers/net/ethernet/broadcom/tg3.c | 10 ++++-
drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 12 ++++--
drivers/net/ethernet/cavium/liquidio/lio_ethtool.c | 8 +++-
.../net/ethernet/cavium/thunder/nicvf_ethtool.c | 4 +-
drivers/net/ethernet/chelsio/cxgb/cxgb2.c | 8 +++-
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 8 +++-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 8 +++-
.../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 8 +++-
drivers/net/ethernet/cisco/enic/enic_ethtool.c | 8 +++-
drivers/net/ethernet/cortina/gemini.c | 8 +++-
drivers/net/ethernet/emulex/benet/be_ethtool.c | 8 +++-
drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 8 +++-
.../net/ethernet/freescale/enetc/enetc_ethtool.c | 8 +++-
drivers/net/ethernet/freescale/fec_main.c | 14 ++++---
drivers/net/ethernet/freescale/gianfar_ethtool.c | 8 +++-
drivers/net/ethernet/hisilicon/hip04_eth.c | 8 +++-
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 8 +++-
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 49 +++++++++++++++++++++-
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 11 +++++
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 26 ++++++++++--
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 1 +
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 8 +++-
drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 8 +++-
drivers/net/ethernet/intel/e1000e/ethtool.c | 8 +++-
drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c | 8 +++-
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 8 +++-
drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 8 +++-
drivers/net/ethernet/intel/ice/ice_ethtool.c | 12 ++++--
drivers/net/ethernet/intel/igb/igb_ethtool.c | 8 +++-
drivers/net/ethernet/intel/igbvf/ethtool.c | 8 +++-
drivers/net/ethernet/intel/igc/igc_ethtool.c | 8 +++-
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 8 +++-
drivers/net/ethernet/intel/ixgbevf/ethtool.c | 8 +++-
drivers/net/ethernet/jme.c | 12 ++++--
drivers/net/ethernet/marvell/mv643xx_eth.c | 12 ++++--
drivers/net/ethernet/marvell/mvneta.c | 14 +++++--
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 +++++--
.../ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 8 +++-
drivers/net/ethernet/marvell/skge.c | 8 +++-
drivers/net/ethernet/marvell/sky2.c | 8 +++-
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 8 +++-
.../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 8 +++-
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 8 +++-
.../ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 8 +++-
drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 12 ++++--
.../net/ethernet/netronome/nfp/nfp_net_ethtool.c | 8 +++-
drivers/net/ethernet/ni/nixge.c | 14 +++++--
.../net/ethernet/pensando/ionic/ionic_ethtool.c | 8 +++-
.../ethernet/qlogic/netxen/netxen_nic_ethtool.c | 8 +++-
drivers/net/ethernet/qlogic/qede/qede.h | 4 +-
drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 8 +++-
.../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 8 +++-
drivers/net/ethernet/realtek/r8169_main.c | 10 ++++-
drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c | 8 +++-
drivers/net/ethernet/sfc/ethtool.c | 8 +++-
drivers/net/ethernet/sfc/falcon/ethtool.c | 8 +++-
drivers/net/ethernet/socionext/netsec.c | 10 +++--
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 8 +++-
drivers/net/ethernet/synopsys/dwc-xlgmac-ethtool.c | 14 +++++--
drivers/net/ethernet/tehuti/tehuti.c | 12 ++++--
drivers/net/ethernet/ti/cpsw.c | 2 +-
drivers/net/ethernet/ti/cpsw_ethtool.c | 8 +++-
drivers/net/ethernet/ti/cpsw_new.c | 2 +-
drivers/net/ethernet/ti/cpsw_priv.h | 8 +++-
drivers/net/ethernet/ti/davinci_emac.c | 8 +++-
drivers/net/ethernet/via/via-velocity.c | 8 +++-
drivers/net/ethernet/xilinx/ll_temac_main.c | 14 +++++--
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 14 +++++--
drivers/net/netdevsim/ethtool.c | 8 +++-
drivers/net/tun.c | 8 +++-
drivers/net/usb/r8152.c | 8 +++-
drivers/net/virtio_net.c | 8 +++-
drivers/net/vmxnet3/vmxnet3_ethtool.c | 12 ++++--
drivers/net/wireless/ath/wil6210/ethtool.c | 14 +++++--
drivers/s390/net/qeth_ethtool.c | 4 +-
drivers/staging/qlge/qlge_ethtool.c | 10 ++++-
include/linux/ethtool.h | 22 ++++++++--
include/uapi/linux/ethtool_netlink.h | 2 +
net/ethtool/coalesce.c | 29 ++++++++++---
net/ethtool/ioctl.c | 15 +++++--
net/ethtool/netlink.h | 2 +-
93 files changed, 678 insertions(+), 208 deletions(-)
--
2.8.1
Powered by blists - more mailing lists