[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YR7r1sWrLR18vGzr@ripper>
Date: Thu, 19 Aug 2021 16:40:06 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: Andy Gross <agross@...nel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>,
Kalle Valo <kvalo@...eaurora.org>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Stanimir Varbanov <svarbanov@...sol.com>,
linux-arm-msm@...r.kernel.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
ath10k@...ts.infradead.org, linux-wireless@...r.kernel.org,
netdev@...r.kernel.org
Subject: Re: [RFC PATCH 11/15] arm64: dts: qcom: sdm845-db845c: switch
bt+wifi to qca power sequencer
On Mon 16 Aug 17:55 PDT 2021, Dmitry Baryshkov wrote:
> Switch sdm845-db845c device tree to use new power sequencer driver
> rather than separate regulators.
>
LGTM!
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 21 ++++++++++++++-------
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 ++++++
> 2 files changed, 20 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 2d5533dd4ec2..c9b694e934d4 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -629,6 +629,16 @@ &qupv3_id_1 {
> status = "okay";
> };
>
> +&qca_pwrseq {
> + status = "okay";
> +
> + vddio-supply = <&vreg_s4a_1p8>;
> +
> + vddxo-supply = <&vreg_l7a_1p8>;
> + vddrfa-supply = <&vreg_l17a_1p3>;
> + vddch0-supply = <&vreg_l25a_3p3>;
> +};
> +
> &sdhc_2 {
> status = "okay";
>
> @@ -916,10 +926,8 @@ &uart6 {
> bluetooth {
> compatible = "qcom,wcn3990-bt";
>
> - vddio-supply = <&vreg_s4a_1p8>;
> - vddxo-supply = <&vreg_l7a_1p8>;
> - vddrf-supply = <&vreg_l17a_1p3>;
> - vddch0-supply = <&vreg_l25a_3p3>;
> + bt-pwrseq = <&qca_pwrseq 1>;
I suppose there will be a DT binding and some defines for the WiFi/BT
argument to &qca_pwrseq?
Regards,
Bjorn
> +
> max-speed = <3200000>;
> };
> };
> @@ -1036,9 +1044,8 @@ &wifi {
> status = "okay";
>
> vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
> - vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
> - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
> - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
> +
> + wifi-pwrseq = <&qca_pwrseq 0>;
>
> qcom,snoc-host-cap-8bit-quirk;
> };
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 0a86fe71a66d..78e889b2c8dd 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -1051,6 +1051,12 @@ psci {
> method = "smc";
> };
>
> + qca_pwrseq: qca-pwrseq {
> + compatible = "qcom,wcn3990-pwrseq";
> + #pwrseq-cells = <1>;
> + status = "disabled";
> + };
> +
> soc: soc@0 {
> #address-cells = <2>;
> #size-cells = <2>;
> --
> 2.30.2
>
Powered by blists - more mailing lists