| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210827163015.3141722-4-keescook@chromium.org>
Date: Fri, 27 Aug 2021 09:30:13 -0700
From: Kees Cook <keescook@...omium.org>
To: linux-kernel@...r.kernel.org
Cc: Kees Cook <keescook@...omium.org>,
"Gustavo A. R. Silva" <gustavoars@...nel.org>,
Arnd Bergmann <arnd@...db.de>,
Kalle Valo <kvalo@...eaurora.org>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Nilesh Javali <njavali@...vell.com>,
Manish Rangankar <mrangankar@...vell.com>,
GR-QLogic-Storage-Upstream@...vell.com,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Larry Finger <Larry.Finger@...inger.net>,
Phillip Potter <phil@...lpotter.co.uk>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Florian Schilhabel <florian.c.schilhabel@...glemail.com>,
Johannes Berg <johannes@...solutions.net>,
Christophe JAILLET <christophe.jaillet@...adoo.fr>,
Fabio Aiuto <fabioaiuto83@...il.com>,
Ross Schmidt <ross.schm.dev@...il.com>,
Marco Cesati <marcocesati@...il.com>,
ath10k@...ts.infradead.org, linux-wireless@...r.kernel.org,
netdev@...r.kernel.org, linux-scsi@...r.kernel.org,
linux-staging@...ts.linux.dev,
Rasmus Villemoes <linux@...musvillemoes.dk>,
Keith Packard <keithp@...thp.com>,
Dan Williams <dan.j.williams@...el.com>,
Daniel Vetter <daniel.vetter@...ll.ch>,
clang-built-linux@...glegroups.com, linux-hardening@...r.kernel.org
Subject: [PATCH v3 3/5] treewide: Replace 0-element memcpy() destinations with flexible arrays
The 0-element arrays that are used as memcpy() destinations are actually
flexible arrays. Adjust their structures accordingly so that memcpy()
can better reason able their destination size (i.e. they need to be seen
as "unknown" length rather than "zero").
In some cases, use of the DECLARE_FLEX_ARRAY() helper is needed when a
flexible array is alone in a struct.
Cc: "Gustavo A. R. Silva" <gustavoars@...nel.org>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: Kalle Valo <kvalo@...eaurora.org>
Cc: "David S. Miller" <davem@...emloft.net>
Cc: Jakub Kicinski <kuba@...nel.org>
Cc: Nilesh Javali <njavali@...vell.com>
Cc: Manish Rangankar <mrangankar@...vell.com>
Cc: GR-QLogic-Storage-Upstream@...vell.com
Cc: "James E.J. Bottomley" <jejb@...ux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@...cle.com>
Cc: Larry Finger <Larry.Finger@...inger.net>
Cc: Phillip Potter <phil@...lpotter.co.uk>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Florian Schilhabel <florian.c.schilhabel@...glemail.com>
Cc: Johannes Berg <johannes@...solutions.net>
Cc: Christophe JAILLET <christophe.jaillet@...adoo.fr>
Cc: Fabio Aiuto <fabioaiuto83@...il.com>
Cc: Ross Schmidt <ross.schm.dev@...il.com>
Cc: Marco Cesati <marcocesati@...il.com>
Cc: ath10k@...ts.infradead.org
Cc: linux-wireless@...r.kernel.org
Cc: netdev@...r.kernel.org
Cc: linux-scsi@...r.kernel.org
Cc: linux-staging@...ts.linux.dev
Signed-off-by: Kees Cook <keescook@...omium.org>
---
drivers/net/wireless/ath/ath10k/bmi.h | 10 +++----
drivers/scsi/qla4xxx/ql4_def.h | 4 +--
drivers/staging/rtl8188eu/include/ieee80211.h | 6 ++--
drivers/staging/rtl8712/ieee80211.h | 4 +--
drivers/staging/rtl8723bs/include/ieee80211.h | 6 ++--
include/linux/ieee80211.h | 30 +++++++++----------
include/uapi/linux/dlm_device.h | 4 +--
7 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/bmi.h b/drivers/net/wireless/ath/ath10k/bmi.h
index f6fadcbdd86e..0685c0d2d4ea 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.h
+++ b/drivers/net/wireless/ath/ath10k/bmi.h
@@ -109,7 +109,7 @@ struct bmi_cmd {
struct {
__le32 addr;
__le32 len;
- u8 payload[0];
+ u8 payload[];
} write_mem;
struct {
__le32 addr;
@@ -138,18 +138,18 @@ struct bmi_cmd {
} rompatch_uninstall;
struct {
__le32 count;
- __le32 patch_ids[0]; /* length of @count */
+ __le32 patch_ids[]; /* length of @count */
} rompatch_activate;
struct {
__le32 count;
- __le32 patch_ids[0]; /* length of @count */
+ __le32 patch_ids[]; /* length of @count */
} rompatch_deactivate;
struct {
__le32 addr;
} lz_start;
struct {
__le32 len; /* max BMI_MAX_DATA_SIZE */
- u8 payload[0]; /* length of @len */
+ u8 payload[]; /* length of @len */
} lz_data;
struct {
u8 name[BMI_NVRAM_SEG_NAME_SZ];
@@ -160,7 +160,7 @@ struct bmi_cmd {
union bmi_resp {
struct {
- u8 payload[0];
+ DECLARE_FLEX_ARRAY(u8, payload);
} read_mem;
struct {
__le32 result;
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 031569c496e5..69a590546bf9 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -366,13 +366,13 @@ struct qla4_work_evt {
struct {
enum iscsi_host_event_code code;
uint32_t data_size;
- uint8_t data[0];
+ uint8_t data[];
} aen;
struct {
uint32_t status;
uint32_t pid;
uint32_t data_size;
- uint8_t data[0];
+ uint8_t data[];
} ping;
} u;
};
diff --git a/drivers/staging/rtl8188eu/include/ieee80211.h b/drivers/staging/rtl8188eu/include/ieee80211.h
index da6245a77d5d..aa5c1a513495 100644
--- a/drivers/staging/rtl8188eu/include/ieee80211.h
+++ b/drivers/staging/rtl8188eu/include/ieee80211.h
@@ -199,7 +199,7 @@ struct ieee_param {
struct {
u32 len;
u8 reserved[32];
- u8 data[0];
+ u8 data[];
} wpa_ie;
struct {
int command;
@@ -212,7 +212,7 @@ struct ieee_param {
u8 idx;
u8 seq[8]; /* sequence counter (set: RX, get: TX) */
u16 key_len;
- u8 key[0];
+ u8 key[];
} crypt;
#ifdef CONFIG_88EU_AP_MODE
struct {
@@ -224,7 +224,7 @@ struct ieee_param {
} add_sta;
struct {
u8 reserved[2];/* for set max_num_sta */
- u8 buf[0];
+ u8 buf[];
} bcn_ie;
#endif
diff --git a/drivers/staging/rtl8712/ieee80211.h b/drivers/staging/rtl8712/ieee80211.h
index 61eff7c5746b..65ceaca9b51e 100644
--- a/drivers/staging/rtl8712/ieee80211.h
+++ b/drivers/staging/rtl8712/ieee80211.h
@@ -78,7 +78,7 @@ struct ieee_param {
struct {
u32 len;
u8 reserved[32];
- u8 data[0];
+ u8 data[];
} wpa_ie;
struct {
int command;
@@ -91,7 +91,7 @@ struct ieee_param {
u8 idx;
u8 seq[8]; /* sequence counter (set: RX, get: TX) */
u16 key_len;
- u8 key[0];
+ u8 key[];
} crypt;
} u;
};
diff --git a/drivers/staging/rtl8723bs/include/ieee80211.h b/drivers/staging/rtl8723bs/include/ieee80211.h
index 378c21595e05..89c311cd20a6 100644
--- a/drivers/staging/rtl8723bs/include/ieee80211.h
+++ b/drivers/staging/rtl8723bs/include/ieee80211.h
@@ -180,7 +180,7 @@ struct ieee_param {
struct {
u32 len;
u8 reserved[32];
- u8 data[0];
+ u8 data[];
} wpa_ie;
struct{
int command;
@@ -193,7 +193,7 @@ struct ieee_param {
u8 idx;
u8 seq[8]; /* sequence counter (set: RX, get: TX) */
u16 key_len;
- u8 key[0];
+ u8 key[];
} crypt;
struct {
u16 aid;
@@ -204,7 +204,7 @@ struct ieee_param {
} add_sta;
struct {
u8 reserved[2];/* for set max_num_sta */
- u8 buf[0];
+ u8 buf[];
} bcn_ie;
} u;
};
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index a6730072d13a..445597c03cd1 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1101,7 +1101,7 @@ struct ieee80211_mgmt {
__le16 auth_transaction;
__le16 status_code;
/* possibly followed by Challenge text */
- u8 variable[0];
+ u8 variable[];
} __packed auth;
struct {
__le16 reason_code;
@@ -1110,26 +1110,26 @@ struct ieee80211_mgmt {
__le16 capab_info;
__le16 listen_interval;
/* followed by SSID and Supported rates */
- u8 variable[0];
+ u8 variable[];
} __packed assoc_req;
struct {
__le16 capab_info;
__le16 status_code;
__le16 aid;
/* followed by Supported rates */
- u8 variable[0];
+ u8 variable[];
} __packed assoc_resp, reassoc_resp;
struct {
__le16 capab_info;
__le16 status_code;
- u8 variable[0];
+ u8 variable[];
} __packed s1g_assoc_resp, s1g_reassoc_resp;
struct {
__le16 capab_info;
__le16 listen_interval;
u8 current_ap[ETH_ALEN];
/* followed by SSID and Supported rates */
- u8 variable[0];
+ u8 variable[];
} __packed reassoc_req;
struct {
__le16 reason_code;
@@ -1140,11 +1140,11 @@ struct ieee80211_mgmt {
__le16 capab_info;
/* followed by some of SSID, Supported rates,
* FH Params, DS Params, CF Params, IBSS Params, TIM */
- u8 variable[0];
+ u8 variable[];
} __packed beacon;
struct {
/* only variable items: SSID, Supported rates */
- u8 variable[0];
+ DECLARE_FLEX_ARRAY(u8, variable);
} __packed probe_req;
struct {
__le64 timestamp;
@@ -1152,7 +1152,7 @@ struct ieee80211_mgmt {
__le16 capab_info;
/* followed by some of SSID, Supported rates,
* FH Params, DS Params, CF Params, IBSS Params */
- u8 variable[0];
+ u8 variable[];
} __packed probe_resp;
struct {
u8 category;
@@ -1161,16 +1161,16 @@ struct ieee80211_mgmt {
u8 action_code;
u8 dialog_token;
u8 status_code;
- u8 variable[0];
+ u8 variable[];
} __packed wme_action;
struct{
u8 action_code;
- u8 variable[0];
+ u8 variable[];
} __packed chan_switch;
struct{
u8 action_code;
struct ieee80211_ext_chansw_ie data;
- u8 variable[0];
+ u8 variable[];
} __packed ext_chan_switch;
struct{
u8 action_code;
@@ -1186,7 +1186,7 @@ struct ieee80211_mgmt {
__le16 timeout;
__le16 start_seq_num;
/* followed by BA Extension */
- u8 variable[0];
+ u8 variable[];
} __packed addba_req;
struct{
u8 action_code;
@@ -1202,11 +1202,11 @@ struct ieee80211_mgmt {
} __packed delba;
struct {
u8 action_code;
- u8 variable[0];
+ u8 variable[];
} __packed self_prot;
struct{
u8 action_code;
- u8 variable[0];
+ u8 variable[];
} __packed mesh_action;
struct {
u8 action;
@@ -1250,7 +1250,7 @@ struct ieee80211_mgmt {
u8 toa[6];
__le16 tod_error;
__le16 toa_error;
- u8 variable[0];
+ u8 variable[];
} __packed ftm;
} u;
} __packed action;
diff --git a/include/uapi/linux/dlm_device.h b/include/uapi/linux/dlm_device.h
index f880d2831160..e83954c69fff 100644
--- a/include/uapi/linux/dlm_device.h
+++ b/include/uapi/linux/dlm_device.h
@@ -45,13 +45,13 @@ struct dlm_lock_params {
void __user *bastaddr;
struct dlm_lksb __user *lksb;
char lvb[DLM_USER_LVB_LEN];
- char name[0];
+ char name[];
};
struct dlm_lspace_params {
__u32 flags;
__u32 minor;
- char name[0];
+ char name[];
};
struct dlm_purge_params {
--
2.30.2
Powered by blists - more mailing lists