[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210828211248.3337476-1-maciej.machnikowski@intel.com>
Date: Sat, 28 Aug 2021 23:12:46 +0200
From: Maciej Machnikowski <maciej.machnikowski@...el.com>
To: maciej.machnikowski@...el.com, netdev@...r.kernel.org,
intel-wired-lan@...ts.osuosl.org
Cc: richardcochran@...il.com, abyagowi@...com,
anthony.l.nguyen@...el.com, davem@...emloft.net, kuba@...nel.org,
linux-kselftest@...r.kernel.org
Subject: [RFC net-next 0/2] Add RTNL interface for SyncE
Synchronous Ethernet networks use a physical layer clock to syntonize
the frequency across different network elements.
Multiple reference clock sources can be used. Clocks recovered from
PHY ports on the RX side or external sources like 1PPS GPS, etc.
This patch series introduces basic interface for reading the DPLL
state on a SyncE capable device. This state gives us information
about the source of the syntonization signal and whether the DPLL
circuit is tuned to the incoming signal.
Next steps:
- add interface to enable recovered clocks and get information
about them
Maciej Machnikowski (2):
rtnetlink: Add new RTM_GETSYNCESTATE message to get SyncE status
ice: add support for reading SyncE DPLL state
drivers/net/ethernet/intel/ice/ice.h | 5 ++
.../net/ethernet/intel/ice/ice_adminq_cmd.h | 34 ++++++++
drivers/net/ethernet/intel/ice/ice_common.c | 62 +++++++++++++++
drivers/net/ethernet/intel/ice/ice_common.h | 4 +
drivers/net/ethernet/intel/ice/ice_devids.h | 3 +
drivers/net/ethernet/intel/ice/ice_main.c | 55 +++++++++++++
drivers/net/ethernet/intel/ice/ice_ptp.c | 35 +++++++++
drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 44 +++++++++++
drivers/net/ethernet/intel/ice/ice_ptp_hw.h | 22 ++++++
include/linux/netdevice.h | 6 ++
include/uapi/linux/if_link.h | 43 +++++++++++
include/uapi/linux/rtnetlink.h | 11 ++-
net/core/rtnetlink.c | 77 +++++++++++++++++++
security/selinux/nlmsgtab.c | 3 +-
14 files changed, 399 insertions(+), 5 deletions(-)
--
2.26.3
Powered by blists - more mailing lists