[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210829002601.282521-1-linus.walleij@linaro.org>
Date: Sun, 29 Aug 2021 02:26:00 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>
Cc: netdev@...r.kernel.org, DENG Qingfang <dqfext@...il.com>,
Alvin Šipraga <alsi@...g-olufsen.dk>,
Mauri Sandberg <sandberg@...lfence.com>,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH net-next 1/2] net: dsa: rtl8366rb: support bridge offloading
From: DENG Qingfang <dqfext@...il.com>
Use port isolation registers to configure bridge offloading.
Tested on the D-Link DIR-685, switching between ports and
sniffing ports to make sure no packets leak.
Cc: Vladimir Oltean <olteanv@...il.com>
Cc: Alvin Šipraga <alsi@...g-olufsen.dk>
Cc: Mauri Sandberg <sandberg@...lfence.com>
Signed-off-by: DENG Qingfang <dqfext@...il.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
drivers/net/dsa/rtl8366rb.c | 84 +++++++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a89093bc6c6a..14939188c108 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -300,6 +300,12 @@
#define RTL8366RB_INTERRUPT_STATUS_REG 0x0442
#define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */
+/* Port isolation registers */
+#define RTL8366RB_PORT_ISO_BASE 0x0F08
+#define RTL8366RB_PORT_ISO(pnum) (RTL8366RB_PORT_ISO_BASE + (pnum))
+#define RTL8366RB_PORT_ISO_EN BIT(0)
+#define RTL8366RB_PORT_ISO_PORTS_MASK GENMASK(7, 1)
+
/* bits 0..5 enable force when cleared */
#define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11
@@ -835,6 +841,21 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
if (ret)
return ret;
+ /* Isolate all user ports so only the CPU port can access them */
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(i),
+ RTL8366RB_PORT_ISO_EN |
+ BIT(RTL8366RB_PORT_NUM_CPU + 1));
+ if (ret)
+ return ret;
+ }
+ /* CPU port can access all ports */
+ ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU),
+ RTL8366RB_PORT_ISO_PORTS_MASK |
+ RTL8366RB_PORT_ISO_EN);
+ if (ret)
+ return ret;
+
/* Set up the "green ethernet" feature */
ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
ARRAY_SIZE(rtl8366rb_green_jam), smi, false);
@@ -1127,6 +1148,67 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port)
rb8366rb_set_port_led(smi, port, false);
}
+static int
+rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
+ struct net_device *bridge)
+{
+ struct realtek_smi *smi = ds->priv;
+ unsigned int port_bitmap = 0;
+ int ret, i;
+
+ /* Loop over all other ports than this one */
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ /* Handled last */
+ if (i == port)
+ continue;
+ /* Not on this bridge */
+ if (dsa_to_port(ds, i)->bridge_dev != bridge)
+ continue;
+ /* Join this port to each other port on the bridge */
+ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+ BIT(port + 1), BIT(port + 1));
+ if (ret)
+ return ret;
+
+ port_bitmap |= BIT(i);
+ }
+
+ /* Set the bits for the ports we can access */
+ return regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+ RTL8366RB_PORT_ISO_PORTS_MASK,
+ port_bitmap << 1);
+}
+
+static void
+rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct net_device *bridge)
+{
+ struct realtek_smi *smi = ds->priv;
+ unsigned int port_bitmap = 0;
+ int ret, i;
+
+ /* Loop over all other ports than this one */
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ /* Handled last */
+ if (i == port)
+ continue;
+ /* Not on this bridge */
+ if (dsa_to_port(ds, i)->bridge_dev != bridge)
+ continue;
+ /* Remove this port from any other port on the bridge */
+ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+ BIT(port + 1), 0);
+ if (ret)
+ return;
+
+ port_bitmap |= BIT(i);
+ }
+
+ /* Clear the bits for the ports we can access */
+ regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+ port_bitmap << 1, 0);
+}
+
static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
struct realtek_smi *smi = ds->priv;
@@ -1510,6 +1592,8 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops = {
.get_strings = rtl8366_get_strings,
.get_ethtool_stats = rtl8366_get_ethtool_stats,
.get_sset_count = rtl8366_get_sset_count,
+ .port_bridge_join = rtl8366rb_port_bridge_join,
+ .port_bridge_leave = rtl8366rb_port_bridge_leave,
.port_vlan_filtering = rtl8366_vlan_filtering,
.port_vlan_add = rtl8366_vlan_add,
.port_vlan_del = rtl8366_vlan_del,
--
2.31.1
Powered by blists - more mailing lists