[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1630346446-21609-5-git-send-email-sbhatta@marvell.com>
Date: Mon, 30 Aug 2021 23:30:46 +0530
From: Subbaraya Sundeep <sbhatta@...vell.com>
To: <davem@...emloft.net>, <kuba@...nel.org>, <netdev@...r.kernel.org>
CC: <sgoutham@...vell.com>, <hkelam@...vell.com>, <gakula@...vell.com>,
Subbaraya Sundeep <sbhatta@...vell.com>
Subject: [net-next PATCH 4/4] octeontx2-af: Set proper errorcode for IPv4 checksum errors
From: Sunil Goutham <sgoutham@...vell.com>
With current config, for packets with IPv4 checksum errors,
errorcode is being set to UNKNOWN. Hence added a separate
errorcodes for outer and inner IPv4 checksum and changed
NPC configuration accordingly.
Also turn on L2 multicast address check in NPC protocol check block.
Fixes: 6b3321bacc5a ("octeontx2-af: Enable packet length and csum validation")
Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@...vell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 4d94bd0..5efb417 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -2020,14 +2020,15 @@ int rvu_npc_init(struct rvu *rvu)
/* Enable below for Rx pkts.
* - Outer IPv4 header checksum validation.
- * - Detect outer L2 broadcast address and set NPC_RESULT_S[L2M].
+ * - Detect outer L2 broadcast address and set NPC_RESULT_S[L2B].
+ * - Detect outer L2 multicast address and set NPC_RESULT_S[L2M].
* - Inner IPv4 header checksum validation.
* - Set non zero checksum error code value
*/
rvu_write64(rvu, blkaddr, NPC_AF_PCK_CFG,
rvu_read64(rvu, blkaddr, NPC_AF_PCK_CFG) |
- BIT_ULL(32) | BIT_ULL(24) | BIT_ULL(6) |
- BIT_ULL(2) | BIT_ULL(1));
+ ((u64)NPC_EC_OIP4_CSUM << 32) | (NPC_EC_IIP4_CSUM << 24) |
+ BIT_ULL(7) | BIT_ULL(6) | BIT_ULL(2) | BIT_ULL(1));
rvu_npc_setup_interfaces(rvu, blkaddr);
--
2.7.4
Powered by blists - more mailing lists