netdev - Re: [net-next RFC PATCH 1/2] drivers: net: dsa: qca8k: add support for led config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YUja1JsFJNwh8hXr@Ansuel-xps.localdomain>
Date:   Mon, 20 Sep 2021 21:02:44 +0200
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Rob Herring <robh+dt@...nel.org>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [net-next RFC PATCH 1/2] drivers: net: dsa: qca8k: add support
 for led config

On Mon, Sep 20, 2021 at 08:55:48PM +0200, Andrew Lunn wrote:
> On Mon, Sep 20, 2021 at 08:08:50PM +0200, Ansuel Smith wrote:
> > Add support for led control and led toggle.
> > qca8337 and qca8327 switch have various reg to control port leds.
> > The current implementation permit to toggle them on/off and to declare
> > their blink rules based on the entry in the dts.
> > They can also be declared in userspace by the "control_rule" entry in
> > the led sysfs. When hw_mode is active (set by default) the leds blink
> > based on the control_rule. There are 6 total control rule.
> > Control rule that applies to phy0-3 commonly used for lan port.
> > Control rule that applies to phy4 commonly used for wan port.
> > Each phy port (5 in total) can have a maximum of 3 different leds
> > attached. Each led can be turned off, blink at 4hz, off or set to
> > hw_mode and follow their respecitve control rule. The hw_mode can be
> > toggled using the sysfs entry and will be disabled on brightness or
> > blink set.
> 
> Hi Ansuel
> 
> It is great you are using the LED subsystem for this. But we need to
> split the code up into a generic part which can shared by any
> switch/PHY and a driver specific part.
> 
> There has been a lot of discussion on the list about this. Maybe you
> can help get us to a generic solution which can be used by everybody.
> 
>     Andrew

Yes, can you point me to the discussion?
I post this as RFC for this exact reason... I read somehwere that there
was a discussion on how to implementd leds for switch but never ever
found it. Also i'm very confused on the node structure on how to define
leds, I think my current implementation is very verbose and long.
As you can see this switch have all the leds controllable with a special
mode to apply some special rules (and actually blink by the switch)
So yes I would like to propose some idea and describe how this switch
works hoping other OEM does the same thing. (I'm very negative about
this part)