netdev - [PATCH net-next] net: dsa: sja1105: don't keep a persistent reference to the reset GPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210922151029.2457157-1-vladimir.oltean@nxp.com>
Date:   Wed, 22 Sep 2021 18:10:29 +0300
From:   Vladimir Oltean <vladimir.oltean@....com>
To:     netdev@...r.kernel.org
Cc:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Subject: [PATCH net-next] net: dsa: sja1105: don't keep a persistent reference to the reset GPIO

The driver only needs the reset GPIO for a very brief period, so instead
of using devres and keeping the descriptor pointer inside priv, just use
that descriptor inside the sja1105_hw_reset function and then let go of
it.

Also use gpiod_get_optional while at it, and error out on real errors
(bad flags etc).

Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
 drivers/net/dsa/sja1105/sja1105.h      |  1 -
 drivers/net/dsa/sja1105/sja1105_main.c | 29 ++++++++++++++++++--------
 2 files changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h
index b83a5114348c..618c8d6a8be1 100644
--- a/drivers/net/dsa/sja1105/sja1105.h
+++ b/drivers/net/dsa/sja1105/sja1105.h
@@ -230,7 +230,6 @@ struct sja1105_private {
 	unsigned long bcast_egress_floods;
 	const struct sja1105_info *info;
 	size_t max_xfer_len;
-	struct gpio_desc *reset_gpio;
 	struct spi_device *spidev;
 	struct dsa_switch *ds;
 	u16 bridge_pvid[SJA1105_MAX_NUM_PORTS];
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 22f39c35f53f..741e965f6068 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -27,15 +27,29 @@
 
 #define SJA1105_UNKNOWN_MULTICAST	0x010000000000ull
 
-static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len,
-			     unsigned int startup_delay)
+/* Configure the optional reset pin and bring up switch */
+static int sja1105_hw_reset(struct device *dev, unsigned int pulse_len,
+			    unsigned int startup_delay)
 {
+	struct gpio_desc *gpio;
+
+	gpio = gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+
+	if (!gpio)
+		return 0;
+
 	gpiod_set_value_cansleep(gpio, 1);
 	/* Wait for minimum reset pulse length */
 	msleep(pulse_len);
 	gpiod_set_value_cansleep(gpio, 0);
 	/* Wait until chip is ready after reset */
 	msleep(startup_delay);
+
+	gpiod_put(gpio);
+
+	return 0;
 }
 
 static void
@@ -3224,17 +3238,14 @@ static int sja1105_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
+	rc = sja1105_hw_reset(dev, 1, 1);
+	if (rc)
+		return rc;
+
 	priv = devm_kzalloc(dev, sizeof(struct sja1105_private), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	/* Configure the optional reset pin and bring up switch */
-	priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
-	if (IS_ERR(priv->reset_gpio))
-		dev_dbg(dev, "reset-gpios not defined, ignoring\n");
-	else
-		sja1105_hw_reset(priv->reset_gpio, 1, 1);
-
 	/* Populate our driver private structure (priv) based on
 	 * the device tree node that was probed (spi)
 	 */
-- 
2.25.1