| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 25 Sep 2021 01:36:25 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>
Cc: netdev@...r.kernel.org, Linus Walleij <linus.walleij@...aro.org>,
Mauri Sandberg <sandberg@...lfence.com>,
Alvin Šipraga <alsi@...g-olufsen.dk>,
DENG Qingfang <dqfext@...il.com>
Subject: [PATCH net-next 3/6 v5] net: dsa: rtl8366rb: Rewrite weird VLAN filering enablement
While we were defining one VLAN per port for isolating the ports
the port_vlan_filtering() callback was implemented to enable a
VLAN on the port + 1. This function makes no sense, not only is
it incomplete as it only enables the VLAN, it doesn't do what
the callback is supposed to do, which is to selectively enable
and disable filtering on a certain port.
Implement the correct callback: we have two registers dealing
with filtering on the RTL9366RB, so we implement an ASIC-specific
callback and implement filering using the register bit that makes
the switch drop frames if the port is not in the VLAN member set.
Cc: Vladimir Oltean <olteanv@...il.com>
Cc: Mauri Sandberg <sandberg@...lfence.com>
Cc: Alvin Šipraga <alsi@...g-olufsen.dk>
Cc: Florian Fainelli <f.fainelli@...il.com>
Cc: DENG Qingfang <dqfext@...il.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
ChangeLog v4->v5:
- Drop the code dropping frames without VID, after Florian
described that this is not expected semantics for this
callback.
ChangeLog v1->v4:
- New patch after discovering that this weirdness of mine is
causing problems.
---
drivers/net/dsa/realtek-smi-core.h | 2 --
drivers/net/dsa/rtl8366.c | 35 ------------------------------
drivers/net/dsa/rtl8366rb.c | 31 +++++++++++++++++++++-----
3 files changed, 25 insertions(+), 43 deletions(-)
diff --git a/drivers/net/dsa/realtek-smi-core.h b/drivers/net/dsa/realtek-smi-core.h
index c8fbd7b9fd0b..214f710d7dd5 100644
--- a/drivers/net/dsa/realtek-smi-core.h
+++ b/drivers/net/dsa/realtek-smi-core.h
@@ -129,8 +129,6 @@ int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable);
int rtl8366_reset_vlan(struct realtek_smi *smi);
-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
- struct netlink_ext_ack *extack);
int rtl8366_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct netlink_ext_ack *extack);
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 59c5bc4f7b71..0672dd56c698 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -292,41 +292,6 @@ int rtl8366_reset_vlan(struct realtek_smi *smi)
}
EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
- struct netlink_ext_ack *extack)
-{
- struct realtek_smi *smi = ds->priv;
- struct rtl8366_vlan_4k vlan4k;
- int ret;
-
- /* Use VLAN nr port + 1 since VLAN0 is not valid */
- if (!smi->ops->is_vlan_valid(smi, port + 1))
- return -EINVAL;
-
- dev_info(smi->dev, "%s filtering on port %d\n",
- vlan_filtering ? "enable" : "disable",
- port);
-
- /* TODO:
- * The hardware support filter ID (FID) 0..7, I have no clue how to
- * support this in the driver when the callback only says on/off.
- */
- ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k);
- if (ret)
- return ret;
-
- /* Just set the filter to FID 1 for now then */
- ret = rtl8366_set_vlan(smi, port + 1,
- vlan4k.member,
- vlan4k.untag,
- 1);
- if (ret)
- return ret;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);
-
int rtl8366_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct netlink_ext_ack *extack)
diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a5b7d7ff8884..1f228a7a5685 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -143,6 +143,8 @@
#define RTL8366RB_PHY_NO_OFFSET 9
#define RTL8366RB_PHY_NO_MASK (0x1f << 9)
+/* VLAN Ingress Control Register */
+#define RTL8366RB_VLAN_INGRESS_CTRL1_REG 0x037E
#define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
/* LED control registers */
@@ -933,11 +935,13 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
if (ret)
return ret;
- /* Discard VLAN tagged packets if the port is not a member of
- * the VLAN with which the packets is associated.
- */
+ /* Accept all packets by default, we enable filtering on-demand */
+ ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
+ 0);
+ if (ret)
+ return ret;
ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
- RTL8366RB_PORT_ALL);
+ 0);
if (ret)
return ret;
@@ -1209,6 +1213,21 @@ rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
}
+static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+{
+ struct realtek_smi *smi = ds->priv;
+ int ret;
+
+ dev_dbg(smi->dev, "port %d: %s VLAN filtering\n", port,
+ vlan_filtering ? "enable" : "disable");
+
+ /* If the port is not in the member set, the frame will be dropped */
+ return regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
+ BIT(port), vlan_filtering ? BIT(port) : 0);
+}
+
static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
struct realtek_smi *smi = ds->priv;
@@ -1437,7 +1456,7 @@ static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan)
if (smi->vlan4k_enabled)
max = RTL8366RB_NUM_VIDS - 1;
- if (vlan == 0 || vlan > max)
+ if (vlan > max)
return false;
return true;
@@ -1594,7 +1613,7 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops = {
.get_sset_count = rtl8366_get_sset_count,
.port_bridge_join = rtl8366rb_port_bridge_join,
.port_bridge_leave = rtl8366rb_port_bridge_leave,
- .port_vlan_filtering = rtl8366_vlan_filtering,
+ .port_vlan_filtering = rtl8366rb_vlan_filtering,
.port_vlan_add = rtl8366_vlan_add,
.port_vlan_del = rtl8366_vlan_del,
.port_enable = rtl8366rb_port_enable,
--
2.31.1
Powered by blists - more mailing lists