[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210927070302.27956-1-lxu@maxlinear.com>
Date: Mon, 27 Sep 2021 15:03:02 +0800
From: Xu Liang <lxu@...linear.com>
To: <andrew@...n.ch>, <hkallweit1@...il.com>, <netdev@...r.kernel.org>,
<davem@...emloft.net>, <kuba@...nel.org>,
<vee.khee.wong@...ux.intel.com>
CC: <linux@...linux.org.uk>, <hmehrtens@...linear.com>,
<tmohren@...linear.com>, <mohammad.athari.ismail@...el.com>,
Xu Liang <lxu@...linear.com>
Subject: [PATCH v2] net: phy: enhance GPY115 loopback disable function
GPY115 need reset PHY when it comes out from loopback mode if the firmware
version number (lower 8 bits) is equal to or below 0x76.
Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Xu Liang <lxu@...linear.com>
---
v2 changes:
Remove wrong comment.
Use genphy_soft_reset instead of modifying MII_BMCR register to trigger PHY reset.
drivers/net/phy/mxl-gpy.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
index 2d5d5081c3b6..5ce1bf03bbd7 100644
--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -493,6 +493,25 @@ static int gpy_loopback(struct phy_device *phydev, bool enable)
return ret;
}
+static int gpy115_loopback(struct phy_device *phydev, bool enable)
+{
+ int ret;
+ int fw_minor;
+
+ if (enable)
+ return gpy_loopback(phydev, enable);
+
+ ret = phy_read(phydev, PHY_FWV);
+ if (ret < 0)
+ return ret;
+
+ fw_minor = FIELD_GET(PHY_FWV_MINOR_MASK, ret);
+ if (fw_minor > 0x0076)
+ return gpy_loopback(phydev, 0);
+
+ return genphy_soft_reset(phydev);
+}
+
static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx),
@@ -527,7 +546,7 @@ static struct phy_driver gpy_drivers[] = {
.handle_interrupt = gpy_handle_interrupt,
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
- .set_loopback = gpy_loopback,
+ .set_loopback = gpy115_loopback,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY115C),
@@ -544,7 +563,7 @@ static struct phy_driver gpy_drivers[] = {
.handle_interrupt = gpy_handle_interrupt,
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
- .set_loopback = gpy_loopback,
+ .set_loopback = gpy115_loopback,
},
{
.phy_id = PHY_ID_GPY211B,
--
2.17.1
Powered by blists - more mailing lists