netdev - [PATCH net-next 3/6] ice: Fix link mode handling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210928215757.3378414-4-anthony.l.nguyen@intel.com>
Date:   Tue, 28 Sep 2021 14:57:54 -0700
From:   Tony Nguyen <anthony.l.nguyen@...el.com>
To:     davem@...emloft.net, kuba@...nel.org
Cc:     Anirudh Venkataramanan <anirudh.venkataramanan@...el.com>,
        netdev@...r.kernel.org, anthony.l.nguyen@...el.com,
        Gurucharan G <gurucharanx.g@...el.com>
Subject: [PATCH net-next 3/6] ice: Fix link mode handling

From: Anirudh Venkataramanan <anirudh.venkataramanan@...el.com>

The messaging for unsupported module detection is different for
lenient mode and strict mode. Update the code to print the right
messaging for a given link mode.

Media topology conflict is not an error in lenient mode, so return
an error code only if not in lenient mode.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@...el.com>
Tested-by: Gurucharan G <gurucharanx.g@...el.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index ab15862a66af..909e5cd98054 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -624,7 +624,10 @@ static void ice_print_topo_conflict(struct ice_vsi *vsi)
 		netdev_info(vsi->netdev, "Potential misconfiguration of the Ethernet port detected. If it was not intended, please use the Intel (R) Ethernet Port Configuration Tool to address the issue.\n");
 		break;
 	case ICE_AQ_LINK_TOPO_UNSUPP_MEDIA:
-		netdev_info(vsi->netdev, "Rx/Tx is disabled on this device because an unsupported module type was detected. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for a list of supported modules.\n");
+		if (test_bit(ICE_FLAG_LINK_LENIENT_MODE_ENA, vsi->back->flags))
+			netdev_warn(vsi->netdev, "An unsupported module type was detected. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for a list of supported modules\n");
+		else
+			netdev_err(vsi->netdev, "Rx/Tx is disabled on this device because an unsupported module type was detected. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for a list of supported modules.\n");
 		break;
 	default:
 		break;
@@ -1965,7 +1968,8 @@ static int ice_configure_phy(struct ice_vsi *vsi)
 
 	ice_print_topo_conflict(vsi);
 
-	if (phy->link_info.topo_media_conflict == ICE_AQ_LINK_TOPO_UNSUPP_MEDIA)
+	if (!test_bit(ICE_FLAG_LINK_LENIENT_MODE_ENA, pf->flags) &&
+	    phy->link_info.topo_media_conflict == ICE_AQ_LINK_TOPO_UNSUPP_MEDIA)
 		return -EPERM;
 
 	if (test_bit(ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA, pf->flags))
-- 
2.26.2