lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210929111855.50254-7-hbathini@linux.ibm.com>
Date:   Wed, 29 Sep 2021 16:48:53 +0530
From:   Hari Bathini <hbathini@...ux.ibm.com>
To:     naveen.n.rao@...ux.ibm.com, christophe.leroy@...roup.eu,
        mpe@...erman.id.au, ast@...nel.org, daniel@...earbox.net
Cc:     paulus@...ba.org, andrii@...nel.org, kafai@...com,
        songliubraving@...com, yhs@...com, john.fastabend@...il.com,
        kpsingh@...nel.org, netdev@...r.kernel.org, bpf@...r.kernel.org,
        linuxppc-dev@...ts.ozlabs.org,
        Ravi Bangoria <ravi.bangoria@...ux.ibm.com>,
        Hari Bathini <hbathini@...ux.ibm.com>
Subject: [PATCH v4 6/8] bpf ppc64: Access only if addr is kernel address

From: Ravi Bangoria <ravi.bangoria@...ux.ibm.com>

On PPC64 with KUAP enabled, any kernel code which wants to
access userspace needs to be surrounded by disable-enable KUAP.
But that is not happening for BPF_PROBE_MEM load instruction.
So, when BPF program tries to access invalid userspace address,
page-fault handler considers it as bad KUAP fault:

  Kernel attempted to read user page (d0000000) - exploit attempt? (uid: 0)

Considering the fact that PTR_TO_BTF_ID (which uses BPF_PROBE_MEM
mode) could either be a valid kernel pointer or NULL but should
never be a pointer to userspace address, execute BPF_PROBE_MEM load
only if addr is kernel address, otherwise set dst_reg=0 and move on.

This will catch NULL, valid or invalid userspace pointers. Only bad
kernel pointer will be handled by BPF exception table.

[Alexei suggested for x86]
Suggested-by: Alexei Starovoitov <ast@...nel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@...ux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@...ux.ibm.com>
---

Changes in v4:
* Used IS_ENABLED() instead of #ifdef.
* Dropped the else case that is not applicable for PPC64.


 arch/powerpc/net/bpf_jit_comp64.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
index 4170999371ee..e1ea64081ae1 100644
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -727,6 +727,32 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
 		/* dst = *(u64 *)(ul) (src + off) */
 		case BPF_LDX | BPF_MEM | BPF_DW:
 		case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
+			/*
+			 * As PTR_TO_BTF_ID that uses BPF_PROBE_MEM mode could either be a valid
+			 * kernel pointer or NULL but not a userspace address, execute BPF_PROBE_MEM
+			 * load only if addr is kernel address (see is_kernel_addr()), otherwise
+			 * set dst_reg=0 and move on.
+			 */
+			if (BPF_MODE(code) == BPF_PROBE_MEM) {
+				EMIT(PPC_RAW_ADDI(b2p[TMP_REG_1], src_reg, off));
+				if (IS_ENABLED(CONFIG_PPC_BOOK3E_64))
+					PPC_LI64(b2p[TMP_REG_2], 0x8000000000000000ul);
+				else /* BOOK3S_64 */
+					PPC_LI64(b2p[TMP_REG_2], PAGE_OFFSET);
+				EMIT(PPC_RAW_CMPLD(b2p[TMP_REG_1], b2p[TMP_REG_2]));
+				PPC_BCC(COND_GT, (ctx->idx + 4) * 4);
+				EMIT(PPC_RAW_LI(dst_reg, 0));
+				/*
+				 * Check if 'off' is word aligned because PPC_BPF_LL()
+				 * (BPF_DW case) generates two instructions if 'off' is not
+				 * word-aligned and one instruction otherwise.
+				 */
+				if (BPF_SIZE(code) == BPF_DW && (off & 3))
+					PPC_JMP((ctx->idx + 3) * 4);
+				else
+					PPC_JMP((ctx->idx + 2) * 4);
+			}
+
 			switch (size) {
 			case BPF_B:
 				EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
-- 
2.31.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ