netdev - Re: [PATCH 1/2] mwifiex: Use non-posted PCI register writes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210930154202.cvw3it3edv7pmqtb@pali>
Date:   Thu, 30 Sep 2021 17:42:02 +0200
From:   Pali Rohár <pali@...nel.org>
To:     Jonas Dreßler <verdre@...d.nl>
Cc:     Andy Shevchenko <andy.shevchenko@...il.com>,
        Brian Norris <briannorris@...omium.org>,
        Amitkumar Karwar <amitkarwar@...il.com>,
        Ganapathi Bhat <ganapathi017@...il.com>,
        Xinming Hu <huxinming820@...il.com>,
        Kalle Valo <kvalo@...eaurora.org>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Tsuchiya Yuto <kitakar@...il.com>,
        linux-wireless <linux-wireless@...r.kernel.org>,
        netdev@...r.kernel.org,
        Linux Kernel <linux-kernel@...r.kernel.org>,
        linux-pci <linux-pci@...r.kernel.org>,
        Maximilian Luz <luzmaximilian@...il.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>
Subject: Re: [PATCH 1/2] mwifiex: Use non-posted PCI register writes

On Thursday 30 September 2021 17:38:43 Jonas Dreßler wrote:
> On 9/23/21 10:22 PM, Pali Rohár wrote:
> > On Thursday 23 September 2021 22:41:30 Andy Shevchenko wrote:
> > > On Thu, Sep 23, 2021 at 6:28 PM Jonas Dreßler <verdre@...d.nl> wrote:
> > > > On 9/22/21 2:50 PM, Jonas Dreßler wrote:
> > > 
> > > ...
> > > 
> > > > - Just calling mwifiex_write_reg() once and then blocking until the card
> > > > wakes up using my delay-loop doesn't fix the issue, it's actually
> > > > writing multiple times that fixes the issue
> > > > 
> > > > These observations sound a lot like writes (and even reads) are actually
> > > > being dropped, don't they?
> > > 
> > > It sounds like you're writing into a not ready (fully powered on) device.
> > 
> > This reminds me a discussion with Bjorn about CRS response returned
> > after firmware crash / reset when device is not ready yet:
> > https://lore.kernel.org/linux-pci/20210922164803.GA203171@bhelgaas/
> > 
> > Could not be this similar issue? You could check it via reading
> > PCI_VENDOR_ID register from config space. And if it is not valid value
> > then card is not really ready yet.
> > 
> > > To check this, try to put a busy loop for reading and check the value
> > > till it gets 0.
> > > 
> > > Something like
> > > 
> > >    unsigned int count = 1000;
> > > 
> > >    do {
> > >      if (mwifiex_read_reg(...) == 0)
> > >        break;
> > >    } while (--count);
> > > 
> > > 
> > > -- 
> > > With Best Regards,
> > > Andy Shevchenko
> 
> I've tried both reading PCI_VENDOR_ID and the firmware status using a busy
> loop now, but sadly none of them worked. It looks like the card always
> replies with the correct values even though it sometimes won't wake up after
> that.
> 
> I do have one new observation though, although I've no clue what could be
> happening here: When reading PCI_VENDOR_ID 1000 times to wakeup we can
> "predict" the wakeup failure because exactly one (usually around the 20th)
> of those 1000 reads will fail.

What does "fail" means here?

> Maybe the firmware actually tries to wake up,
> encounters an error somewhere in its wakeup routines and then goes down a
> special failure code path. That code path keeps the cards CPU so busy that
> at some point a PCI_VENDOR_ID request times out?
> 
> Or well, maybe the card actually wakes up fine, but we don't receive the
> interrupt on our end, so many possibilities...