netdev - [PATCH net-next 6/6] selftests: net: mscc: ocelot: add a test for egress VLAN modification

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211001151531.2840873-7-vladimir.oltean@nxp.com>
Date:   Fri,  1 Oct 2021 18:15:31 +0300
From:   Vladimir Oltean <vladimir.oltean@....com>
To:     netdev@...r.kernel.org, Jakub Kicinski <kuba@...nel.org>,
        "David S. Miller" <davem@...emloft.net>
Cc:     Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Claudiu Manoil <claudiu.manoil@....com>,
        UNGLinuxDriver@...rochip.com,
        Xiaoliang Yang <xiaoliang.yang_1@....com>,
        Po Liu <po.liu@....com>
Subject: [PATCH net-next 6/6] selftests: net: mscc: ocelot: add a test for egress VLAN modification

For this test we are exercising the VCAP ES0 block's ability to match on
a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived
from VID_A_VAL plus the classified VLAN.

$eth3.200 is the generator port
$eth0 is the bridged DUT port that receives
$eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300
      on egress via VCAP ES0
$eth2 is the port that receives from the DUT port $eth1

Since the egress rewriting happens outside the bridging service, VID 300
does not need to be in the bridge VLAN table of $eth1.

Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
 .../drivers/net/ocelot/tc_flower_chains.sh    | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
index 4711313a92a3..eaf8a04a7ca5 100755
--- a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
+++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
@@ -285,6 +285,44 @@ test_vlan_ingress_modify()
 	ip link set br0 type bridge vlan_filtering 0
 }
 
+test_vlan_egress_modify()
+{
+	printf "Testing egress VLAN modification..		"
+
+	tc qdisc add dev $eth1 clsact
+
+	ip link set br0 type bridge vlan_filtering 1
+	bridge vlan add dev $eth0 vid 200
+	bridge vlan add dev $eth1 vid 200
+
+	tc filter add dev $eth1 egress chain $(ES0) pref 3 \
+		protocol 802.1Q flower skip_sw vlan_id 200 vlan_prio 0 \
+		action vlan modify id 300 priority 7
+
+	tcpdump_start $eth2
+
+	$MZ $eth3.200 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip
+
+	sleep 1
+
+	tcpdump_stop
+
+	if tcpdump_show | grep -q "$eth3_mac > $eth2_mac, .* vlan 300"; then
+		echo "OK"
+	else
+		echo "FAIL"
+	fi
+
+	tcpdump_cleanup
+
+	tc filter del dev $eth1 egress chain $(ES0) pref 3
+	tc qdisc del dev $eth1 clsact
+
+	bridge vlan del dev $eth0 vid 200
+	bridge vlan del dev $eth1 vid 200
+	ip link set br0 type bridge vlan_filtering 0
+}
+
 test_skbedit_priority()
 {
 	local num_pkts=100
@@ -310,6 +348,7 @@ ALL_TESTS="
 	test_vlan_pop
 	test_vlan_push
 	test_vlan_ingress_modify
+	test_vlan_egress_modify
 	test_skbedit_priority
 "
 
-- 
2.25.1