netdev - [PATCH net] r8152: avoid to resubmit rx immediately

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20211004062858.1679-381-nic_swsd@realtek.com>
Date:   Mon, 4 Oct 2021 14:28:58 +0800
From:   Hayes Wang <hayeswang@...ltek.com>
To:     <jason-ch.chen@...iatek.com>, <kuba@...nel.org>,
        <davem@...emloft.net>
CC:     <netdev@...r.kernel.org>, <nic_swsd@...ltek.com>,
        <linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
        Hayes Wang <hayeswang@...ltek.com>
Subject: [PATCH net] r8152: avoid to resubmit rx immediately

For the situation that the disconnect event comes very late when the
device is unplugged, the driver would resubmit the RX bulk transfer
after getting the callback with -EPROTO immediately and continually.
Finally, soft lockup occurs.

This patch avoids to resubmit RX immediately. It uses a workqueue to
schedule the RX NAPI. And the NAPI would resubmit the RX. It let the
disconnect event have opportunity to stop the submission before soft
lockup.

Reported-by: Jason-ch Chen <jason-ch.chen@...iatek.com>
Tested-by: Jason-ch Chen <jason-ch.chen@...iatek.com>
Signed-off-by: Hayes Wang <hayeswang@...ltek.com>
---
 drivers/net/usb/r8152.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 60ba9b734055..f329e39100a7 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -767,6 +767,7 @@ enum rtl8152_flags {
 	PHY_RESET,
 	SCHEDULE_TASKLET,
 	GREEN_ETHERNET,
+	RX_EPROTO,
 };
 
 #define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2	0x3082
@@ -1770,6 +1771,14 @@ static void read_bulk_callback(struct urb *urb)
 		rtl_set_unplug(tp);
 		netif_device_detach(tp->netdev);
 		return;
+	case -EPROTO:
+		urb->actual_length = 0;
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		list_add_tail(&agg->list, &tp->rx_done);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+		set_bit(RX_EPROTO, &tp->flags);
+		schedule_delayed_work(&tp->schedule, 1);
+		return;
 	case -ENOENT:
 		return;	/* the urb is in unlink state */
 	case -ETIME:
@@ -2425,6 +2434,7 @@ static int rx_bottom(struct r8152 *tp, int budget)
 	if (list_empty(&tp->rx_done))
 		goto out1;
 
+	clear_bit(RX_EPROTO, &tp->flags);
 	INIT_LIST_HEAD(&rx_queue);
 	spin_lock_irqsave(&tp->rx_lock, flags);
 	list_splice_init(&tp->rx_done, &rx_queue);
@@ -2441,7 +2451,7 @@ static int rx_bottom(struct r8152 *tp, int budget)
 
 		agg = list_entry(cursor, struct rx_agg, list);
 		urb = agg->urb;
-		if (urb->actual_length < ETH_ZLEN)
+		if (urb->status != 0 || urb->actual_length < ETH_ZLEN)
 			goto submit;
 
 		agg_free = rtl_get_free_rx(tp, GFP_ATOMIC);
@@ -6643,6 +6653,10 @@ static void rtl_work_func_t(struct work_struct *work)
 	    netif_carrier_ok(tp->netdev))
 		tasklet_schedule(&tp->tx_tl);
 
+	if (test_and_clear_bit(RX_EPROTO, &tp->flags) &&
+	    !list_empty(&tp->rx_done))
+		napi_schedule(&tp->napi);
+
 	mutex_unlock(&tp->control);
 
 out1:
-- 
2.31.1