lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20211004074814.5900791a@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com>
Date:   Mon, 4 Oct 2021 07:48:14 -0700
From:   Jakub Kicinski <kubakici@...pl>
To:     "Andreas K. Huettel" <andreas.huettel@...de>
Cc:     netdev@...r.kernel.org, intel-wired-lan@...ts.osuosl.org,
        Sasha Neftin <sasha.neftin@...el.com>
Subject: Re: Intel I350 regression 5.10 -> 5.14 ("The NVM Checksum Is Not
 Valid")  [8086:1521]

On Mon, 04 Oct 2021 15:06:31 +0200 Andreas K. Huettel wrote:
> Dear all, 
> 
> I hope this is the right place to ask, if not please advise me where to go.

Adding intel-wired-lan@...ts.osuosl.org and Sasha as well.

> I have a new Dell machine with both an Intel on-board ethernet controller 
> ([8086:15f9]) and an additional 2-port extension card ([8086:1521]). 
> 
> The second adaptor, a "DeLock PCIe 2xGBit", worked fine as far as I could 
> see with Linux 5.10.59, but fails to initialize with Linux 5.14.9.
> 
> dilfridge ~ # lspci -nn
> [...]
> 01:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev ff)
> 01:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev ff)
> [...]
> 
> dilfridge ~ # dmesg|grep igb
> [    2.069286] igb: Intel(R) Gigabit Ethernet Network Driver
> [    2.069288] igb: Copyright (c) 2007-2014 Intel Corporation.
> [    2.069305] igb 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
> [    2.069624] igb 0000:01:00.0 0000:01:00.0 (uninitialized): PCIe link lost
> [    2.386659] igb 0000:01:00.0: PHY reset is blocked due to SOL/IDER session.
> [    4.115500] igb 0000:01:00.0: The NVM Checksum Is Not Valid
> [    4.133807] igb: probe of 0000:01:00.0 failed with error -5
> [    4.133820] igb 0000:01:00.1: can't change power state from D3cold to D0 (config space inaccessible)
> [    4.134072] igb 0000:01:00.1 0000:01:00.1 (uninitialized): PCIe link lost
> [    4.451602] igb 0000:01:00.1: PHY reset is blocked due to SOL/IDER session.
> [    6.180123] igb 0000:01:00.1: The NVM Checksum Is Not Valid
> [    6.188631] igb: probe of 0000:01:00.1 failed with error -5
> 
> Any advice on how to proceed? Willing to test patches and provide additional debug info.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ