[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <983e7d02-ae9e-0c30-a7b8-f94855e7927b@omp.ru>
Date: Tue, 5 Oct 2021 22:26:22 +0300
From: Sergey Shtylyov <s.shtylyov@....ru>
To: Biju Das <biju.das.jz@...renesas.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>
CC: Sergei Shtylyov <sergei.shtylyov@...il.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Sergey Shtylyov <s.shtylyov@...russia.ru>,
"Adam Ford" <aford173@...il.com>, Andrew Lunn <andrew@...n.ch>,
Yuusuke Ashizuka <ashiduka@...itsu.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
<netdev@...r.kernel.org>, <linux-renesas-soc@...r.kernel.org>,
Chris Paterson <Chris.Paterson2@...esas.com>,
Biju Das <biju.das@...renesas.com>,
"Prabhakar Mahadev Lad" <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [RFC 12/12] ravb: Update/Add comments
On 10/5/21 2:06 PM, Biju Das wrote:
> This patch update/add the following comments
>
> 1) Fix the typo AVB->DMAC in comment, as the code following the comment
> is for GbEthernet DMAC in ravb_dmac_init_gbeth()
; not needed at the end of the comment. :-)
>
> 2) Update the comment "PAUSE prohibition"-> "EMAC Mode: PAUSE
> prohibition; Duplex; TX; RX;" in ravb_emac_init_gbeth()
>
> 3) Document PFRI register bit, as it is only supported for
> R-Car Gen3 and RZ/G2L.
Not a good idea to do 3 different things in 1 patch... I know I said that (2) isn't worth
a separate patch but I meant that it shouldbe done as a part of a lrger ravb_emac_init_gbeth()
change. Sorry for not being clear enough...
> Signed-off-by: Biju Das <biju.das.jz@...renesas.com>
> ---
> RFC changes:
> * New patch.
> ---
> drivers/net/ethernet/renesas/ravb.h | 2 +-
> drivers/net/ethernet/renesas/ravb_main.c | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)
[...]
> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
> index dfbbda3681f8..4a057005a470 100644
> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
> @@ -519,7 +519,7 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
> /* Receive frame limit set register */
> ravb_write(ndev, GBETH_RX_BUFF_MAX + ETH_FCS_LEN, RFLR);
>
> - /* PAUSE prohibition */
> + /* EMAC Mode: PAUSE prohibition; Duplex; TX; RX; */
No need for ; after RX.
[...]
MBR, Sergey
Powered by blists - more mailing lists