netdev - Re: [PATCH] net: phy: micrel: ksz9131 led errata workaround

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 6 Oct 2021 11:39:55 +0200
From:   Francesco Dolcini <francesco.dolcini@...adex.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     philippe.schenker@...adex.com, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] net: phy: micrel: ksz9131 led errata workaround

Hello,
the link to the errata in the commit message is wrong, the correct
one is https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ9131RNX-Silicon-Errata-and-Data-Sheet-Clarification-80000863B.pdf, I will fix it in the next patch version.

Francesco


On Wed, Oct 06, 2021 at 09:37:55AM +0200, Francesco Dolcini wrote:
> Micrel KSZ9131 PHY LED behavior is not correct when configured in
> Individual Mode, LED1 (Activity LED) is in the ON state when there is
> no-link.
> 
> Workaround this by setting bit 9 of register 0x1e after verifying that
> the LED configuration is Individual Mode.
> 
> This issue is described in KSZ9131RNX Silicon Errata DS80000693B
> (http://ww1.microchip.com/downloads/en/DeviceDoc/80000863A.pdf) and
> according to that it will not be corrected in a future silicon revision.
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini@...adex.com>
> ---
>  drivers/net/phy/micrel.c | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index c330a5a9f665..661dedec84c4 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -1003,6 +1003,23 @@ static int ksz9131_config_rgmii_delay(struct phy_device *phydev)
>  			      txcdll_val);
>  }
>  
> +/* Silicon Errata DS80000693B
> + *
> + * When LEDs are configured in Individual Mode, LED1 is ON in a no-link
> + * condition. Workaround is to set register 0x1e, bit 9, this way LED1 behaves
> + * according to the datasheet (off if there is no link).
> + */
> +
> +static int ksz9131_led_errata(struct phy_device *phydev)
> +{
> +	int ret = 0;
> +
> +	if (phy_read_mmd(phydev, 2, 0) & BIT(4))
> +		ret = phy_set_bits(phydev, 0x1e, BIT(9));
> +
> +	return ret;
> +}
> +
>  static int ksz9131_config_init(struct phy_device *phydev)
>  {
>  	struct device_node *of_node;
> @@ -1058,6 +1075,10 @@ static int ksz9131_config_init(struct phy_device *phydev)
>  	if (ret < 0)
>  		return ret;
>  
> +	ret = ksz9131_led_errata(phydev);
> +	if (ret < 0)
> +		return ret;
> +
>  	return 0;
>  }
>  
> -- 
> 2.25.1
>