[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211006035407.1147909-14-dmitry.baryshkov@linaro.org>
Date: Wed, 6 Oct 2021 06:54:05 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>,
Kalle Valo <kvalo@...eaurora.org>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Stanimir Varbanov <svarbanov@...sol.com>
Cc: linux-arm-msm@...r.kernel.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
ath10k@...ts.infradead.org, linux-wireless@...r.kernel.org,
netdev@...r.kernel.org
Subject: [PATCH v1 13/15] arm64: dts: qcom: sdm845-db845c: add second channel to qca power sequencer
On DB845c board WiFi/BT chip can use both RF channels/antennas, so add
vddch1-supply property.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a6a34a959a91..0f3214c60980 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -342,6 +342,12 @@ vreg_l21a_2p95: ldo21 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ vreg_l23a_3p3: ldo23 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vreg_l24a_3p075: ldo24 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
@@ -637,6 +643,7 @@ &qca_pwrseq {
vddxo-supply = <&vreg_l7a_1p8>;
vddrf-supply = <&vreg_l17a_1p3>;
vddch0-supply = <&vreg_l25a_3p3>;
+ vddch1-supply = <&vreg_l23a_3p3>;
};
&sdhc_2 {
--
2.33.0
Powered by blists - more mailing lists