lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Fri, 8 Oct 2021 02:22:23 +0200 From: Ansuel Smith <ansuelsmth@...il.com> To: Andrew Lunn <andrew@...n.ch>, Vivien Didelot <vivien.didelot@...il.com>, Florian Fainelli <f.fainelli@...il.com>, Vladimir Oltean <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>, Rob Herring <robh+dt@...nel.org>, Heiner Kallweit <hkallweit1@...il.com>, Russell King <linux@...linux.org.uk>, Ansuel Smith <ansuelsmth@...il.com>, netdev@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org Subject: [net-next PATCH v2 13/15] dt-bindings: net: dsa: qca8k: document open drain binding Document new binding qca,power_on_sel used to enable Power-on-strapping select reg and qca,led_open_drain to set led to open drain mode. Signed-off-by: Ansuel Smith <ansuelsmth@...il.com> --- Documentation/devicetree/bindings/net/dsa/qca8k.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt index b9cccb657373..9fb4db65907e 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt @@ -13,6 +13,17 @@ Required properties: Optional properties: - reset-gpios: GPIO to be used to reset the whole device +- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open + drain or eeprom presence. This is needed for broken + device that have wrong configuration or when the oem + decided to not use pin strapping and fallback to sw + regs. +- qca,led-open-drain: Set leds to open-drain mode. This require the + qca,ignore-power-on-sel to be set or the driver will fail + to probe. This is needed if the oem doesn't use pin + strapping to set this mode and prefer to set it using sw + regs. The pin strapping related to led open drain mode is + the pin B68 for QCA832x and B49 for QCA833x - qca,mac6-exchange: Internally swap MAC0 with MAC6. - qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge. Mostly used in qca8327 with CPU port 0 set to -- 2.32.0
Powered by blists - more mailing lists