netdev - [net-next PATCH v2 03/15] drivers: net: phy: at803x: enable prefer master for 83xx internal phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211008002225.2426-4-ansuelsmth@gmail.com>
Date:   Fri,  8 Oct 2021 02:22:13 +0200
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Ansuel Smith <ansuelsmth@...il.com>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [net-next PATCH v2 03/15] drivers: net: phy: at803x: enable prefer master for 83xx internal phy

>From original QCA source code the port was set to prefer master as port
type in 1000BASE-T mode. Apply the same settings also here.

Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
 drivers/net/phy/at803x.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 5208ea8fdd69..402b2096f209 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1325,6 +1325,9 @@ static int qca83xx_config_init(struct phy_device *phydev)
 		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
 				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
 
+	/* Following original QCA sourcecode set port to prefer master */
+	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
+
 	return 0;
 }
 
-- 
2.32.0