| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 10 Oct 2021 13:15:45 +0200
From: Ansuel Smith <ansuelsmth@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Russell King <linux@...linux.org.uk>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Ansuel Smith <ansuelsmth@...il.com>,
Matthew Hagan <mnhagan88@...il.com>
Subject: [net-next PATCH v4 02/13] net: dsa: qca8k: add support for sgmii falling edge
Add support for this in the qca8k driver. Also add support for SGMII
rx/tx clock falling edge. This is only present for pad0, pad5 and
pad6 have these bit reserved from Documentation. Add a comment that this
is hardcoded to PAD0 as qca8327/28/34/37 have an unique sgmii line and
setting falling in port0 applies to both configuration with sgmii used
for port0 or port6.
Signed-off-by: Matthew Hagan <mnhagan88@...il.com>
Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
---
drivers/net/dsa/qca8k.c | 25 +++++++++++++++++++++++++
drivers/net/dsa/qca8k.h | 3 +++
2 files changed, 28 insertions(+)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index a892b897cd0d..3e4a12d6d61c 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1172,6 +1172,7 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct qca8k_priv *priv = ds->priv;
+ struct dsa_port *dp;
u32 reg, val;
int ret;
@@ -1240,6 +1241,8 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
break;
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_1000BASEX:
+ dp = dsa_to_port(ds, port);
+
/* Enable SGMII on the port */
qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
@@ -1274,6 +1277,28 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
}
qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
+
+ /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
+ * falling edge is set writing in the PORT0 PAD reg
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8327 ||
+ priv->switch_id == QCA8K_ID_QCA8337)
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+
+ val = 0;
+
+ /* SGMII Clock phase configuration */
+ if (of_property_read_bool(dp->dn, "qca,sgmii-rxclk-falling-edge"))
+ val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
+
+ if (of_property_read_bool(dp->dn, "qca,sgmii-txclk-falling-edge"))
+ val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
+
+ if (val)
+ ret = qca8k_rmw(priv, reg,
+ QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
+ QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
+ val);
break;
default:
dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index fc7db94cc0c9..3fded69a6839 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -35,6 +35,9 @@
#define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8)
#define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8)
#define QCA8K_REG_PORT0_PAD_CTRL 0x004
+#define QCA8K_PORT0_PAD_CTRL_MAC06_EXCHG BIT(31)
+#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19)
+#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18)
#define QCA8K_REG_PORT5_PAD_CTRL 0x008
#define QCA8K_REG_PORT6_PAD_CTRL 0x00c
#define QCA8K_PORT_PAD_RGMII_EN BIT(26)
--
2.32.0
Powered by blists - more mailing lists