Message-ID: <20211012125045.kh73y2vgsl47aola@skbuf>
Date:   Tue, 12 Oct 2021 15:50:45 +0300
From:   Vladimir Oltean <olteanv@...il.com>
To:     Alvin Šipraga <alvin@...s.dk>
Cc:     Linus Walleij <linus.walleij@...aro.org>,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Alvin Šipraga <alsi@...g-olufsen.dk>,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 4/6] net: dsa: tag_rtl8_4: add realtek 8 byte
 protocol 4 tag

On Tue, Oct 12, 2021 at 02:35:53PM +0200, Alvin Šipraga wrote:
> From: Alvin Šipraga <alsi@...g-olufsen.dk>
> 
> This commit implements a basic version of the 8 byte tag protocol used
> in the Realtek RTL8365MB-VC unmanaged switch, which carries with it a
> protocol version of 0x04.
> 
> The implementation itself only handles the parsing of the EtherType
> value and Realtek protocol version, together with the source or
> destination port fields. The rest is left unimplemented for now.
> 
> The tag format is described in a confidential document provided to my
> company by Realtek Semiconductor Corp. Permission has been granted by
> the vendor to publish this driver based on that material, together with
> an extract from the document describing the tag format and its fields.
> It is hoped that this will help future implementors who do not have
> access to the material but who wish to extend the functionality of
> drivers for chips which use this protocol.
> 
> In addition, two possible values of the REASON field are specified,
> based on experiments on my end. Realtek does not specify what value this
> field can take.
> 
> Signed-off-by: Alvin Šipraga <alsi@...g-olufsen.dk>
> ---

Reviewed-by: Vladimir Oltean <olteanv@...il.com>

> RFC -> v1:
>   - minor changes to the big comment at the top, including some
>     empirical information about the REASON code
>   - use dev_*_ratelimited() instead of netdev_*() for logging
>   - use warning instead of debug messages
>   - use ETH_P_REALTEK from if_ether.h
>   - set LEARN_DIS on xmit
>   - remove superfluous variables/expressions and use __b16 for tag
>     variable
>   - use new helper functions to insert/remove CPU tag
>   - set offload_fwd_mark properly using helper function
> 
>  include/net/dsa.h    |   2 +
>  net/dsa/Kconfig      |   6 ++
>  net/dsa/Makefile     |   1 +
>  net/dsa/tag_rtl8_4.c | 166 +++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 175 insertions(+)
>  create mode 100644 net/dsa/tag_rtl8_4.c
> 
> diff --git a/include/net/dsa.h b/include/net/dsa.h
> index d784e76113b8..783060e851a9 100644
> --- a/include/net/dsa.h
> +++ b/include/net/dsa.h
> @@ -51,6 +51,7 @@ struct phylink_link_state;
>  #define DSA_TAG_PROTO_SEVILLE_VALUE		21
>  #define DSA_TAG_PROTO_BRCM_LEGACY_VALUE		22
>  #define DSA_TAG_PROTO_SJA1110_VALUE		23
> +#define DSA_TAG_PROTO_RTL8_4_VALUE		24
>  
>  enum dsa_tag_protocol {
>  	DSA_TAG_PROTO_NONE		= DSA_TAG_PROTO_NONE_VALUE,
> @@ -77,6 +78,7 @@ enum dsa_tag_protocol {
>  	DSA_TAG_PROTO_OCELOT_8021Q	= DSA_TAG_PROTO_OCELOT_8021Q_VALUE,
>  	DSA_TAG_PROTO_SEVILLE		= DSA_TAG_PROTO_SEVILLE_VALUE,
>  	DSA_TAG_PROTO_SJA1110		= DSA_TAG_PROTO_SJA1110_VALUE,
> +	DSA_TAG_PROTO_RTL8_4		= DSA_TAG_PROTO_RTL8_4_VALUE,
>  };
>  
>  struct dsa_switch;
> diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
> index 6c7f79e45886..57fc52b17d55 100644
> --- a/net/dsa/Kconfig
> +++ b/net/dsa/Kconfig
> @@ -130,6 +130,12 @@ config NET_DSA_TAG_RTL4_A
>  	  Realtek switches with 4 byte protocol A tags, sich as found in
>  	  the Realtek RTL8366RB.
>  
> +config NET_DSA_TAG_RTL8_4
> +	tristate "Tag driver for Realtek 8 byte protocol 4 tags"
> +	help
> +	  Say Y or M if you want to enable support for tagging frames for Realtek
> +	  switches with 8 byte protocol 4 tags, such as the Realtek RTL8365MB-VC.
> +
>  config NET_DSA_TAG_LAN9303
>  	tristate "Tag driver for SMSC/Microchip LAN9303 family of switches"
>  	help
> diff --git a/net/dsa/Makefile b/net/dsa/Makefile
> index f78d537044db..9f75820e7c98 100644
> --- a/net/dsa/Makefile
> +++ b/net/dsa/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_NET_DSA_TAG_OCELOT) += tag_ocelot.o
>  obj-$(CONFIG_NET_DSA_TAG_OCELOT_8021Q) += tag_ocelot_8021q.o
>  obj-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
>  obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o
> +obj-$(CONFIG_NET_DSA_TAG_RTL8_4) += tag_rtl8_4.o
>  obj-$(CONFIG_NET_DSA_TAG_SJA1105) += tag_sja1105.o
>  obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
>  obj-$(CONFIG_NET_DSA_TAG_XRS700X) += tag_xrs700x.o
> diff --git a/net/dsa/tag_rtl8_4.c b/net/dsa/tag_rtl8_4.c
> new file mode 100644
> index 000000000000..da22fd12b645
> --- /dev/null
> +++ b/net/dsa/tag_rtl8_4.c
> @@ -0,0 +1,166 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Handler for Realtek 8 byte switch tags
> + *
> + * Copyright (C) 2021 Alvin Šipraga <alsi@...g-olufsen.dk>
> + *
> + * NOTE: Currently only supports protocol "4" found in the RTL8365MB, hence
> + * named tag_rtl8_4.
> + *
> + * This tag header has the following format:
> + *
> + *  -------------------------------------------
> + *  | MAC DA | MAC SA | 8 byte tag | Type | ...
> + *  -------------------------------------------
> + *     _______________/            \______________________________________
> + *    /                                                                   \
> + *  0                                  7|8                                 15
> + *  |-----------------------------------+-----------------------------------|---
> + *  |                               (16-bit)                                | ^
> + *  |                       Realtek EtherType [0x8899]                      | |
> + *  |-----------------------------------+-----------------------------------| 8
> + *  |              (8-bit)              |              (8-bit)              |
> + *  |          Protocol [0x04]          |              REASON               | b
> + *  |-----------------------------------+-----------------------------------| y
> + *  |   (1)  | (1) | (2) |   (1)  | (3) | (1)  | (1) |    (1)    |   (5)    | t
> + *  | FID_EN |  X  | FID | PRI_EN | PRI | KEEP |  X  | LEARN_DIS |    X     | e
> + *  |-----------------------------------+-----------------------------------| s

After our previous discussion I thought you said these bits were an EFID_EN and EFID?
Or did you reconsider?

> + *  |   (1)  |                       (15-bit)                               | |
> + *  |  ALLOW |                        TX/RX                                 | v
> + *  |-----------------------------------+-----------------------------------|---
> + *
> + * With the following field descriptions:
> + *
> + *    field      | description
> + *   ------------+-------------
> + *    Realtek    | 0x8899: indicates that this is a proprietary Realtek tag;
> + *     EtherType |         note that Realtek uses the same EtherType for
> + *               |         other incompatible tag formats (e.g. tag_rtl4_a.c)
> + *    Protocol   | 0x04: indicates that this tag conforms to this format
> + *    X          | reserved
> + *   ------------+-------------
> + *    REASON     | reason for forwarding packet to CPU
> + *               | 0: packet was forwarded or flooded to CPU
> + *               | 80: packet was trapped to CPU
> + *    FID_EN     | 1: packet has an FID
> + *               | 0: no FID
> + *    FID        | FID of packet (if FID_EN=1)
> + *    PRI_EN     | 1: force priority of packet
> + *               | 0: don't force priority
> + *    PRI        | priority of packet (if PRI_EN=1)
> + *    KEEP       | preserve packet VLAN tag format
> + *    LEARN_DIS  | don't learn the source MAC address of the packet
> + *    ALLOW      | 1: treat TX/RX field as an allowance port mask, meaning the
> + *               |    packet may only be forwarded to ports specified in the
> + *               |    mask
> + *               | 0: no allowance port mask, TX/RX field is the forwarding
> + *               |    port mask
> + *    TX/RX      | TX (switch->CPU): port number the packet was received on
> + *               | RX (CPU->switch): forwarding port mask (if ALLOW=0)
> + *               |                   allowance port mask (if ALLOW=1)
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/etherdevice.h>
> +
> +#include "dsa_priv.h"
> +
> +#define RTL8_4_TAG_LEN			8
> +/* 0x04 = RTL8365MB DSA protocol
> + */
> +#define RTL8_4_PROTOCOL_RTL8365MB	0x04
> +
> +static struct sk_buff *rtl8_4_tag_xmit(struct sk_buff *skb,
> +				       struct net_device *dev)
> +{
> +	struct dsa_port *dp = dsa_slave_to_port(dev);
> +	__be16 *tag;
> +
> +	/* Pad out so the (stripped) packet is at least 64 bytes long
> +	 * (including FCS), otherwise the switch will drop the packet.
> +	 * Then we need an additional 8 bytes for the Realtek tag.
> +	 */
> +	if (unlikely(__skb_put_padto(skb, ETH_ZLEN + RTL8_4_TAG_LEN, false)))
> +		return NULL;
> +
> +	skb_push(skb, RTL8_4_TAG_LEN);
> +
> +	dsa_alloc_etype_header(skb, RTL8_4_TAG_LEN);
> +	tag = dsa_etype_header_pos_tx(skb);
> +
> +	/* Set Realtek EtherType */
> +	tag[0] = htons(ETH_P_REALTEK);
> +
> +	/* Set Protocol; zero REASON */
> +	tag[1] = htons(RTL8_4_PROTOCOL_RTL8365MB << 8);
> +
> +	/* Zero FID_EN, FID, PRI_EN, PRI, KEEP; set LEARN_DIS */
> +	tag[2] = htons(1 << 5);
> +
> +	/* Zero ALLOW; set RX (CPU->switch) forwarding port mask */
> +	tag[3] = htons(BIT(dp->index));
> +
> +	return skb;
> +}
> +
> +static struct sk_buff *rtl8_4_tag_rcv(struct sk_buff *skb,
> +				      struct net_device *dev)
> +{
> +	__be16 *tag;
> +	u16 etype;
> +	u8 proto;
> +	u8 port;
> +
> +	if (unlikely(!pskb_may_pull(skb, RTL8_4_TAG_LEN)))
> +		return NULL;
> +
> +	tag = dsa_etype_header_pos_rx(skb);
> +
> +	/* Parse Realtek EtherType */
> +	etype = ntohs(tag[0]);
> +	if (unlikely(etype != ETH_P_REALTEK)) {
> +		dev_warn_ratelimited(&dev->dev,
> +				     "non-realtek ethertype 0x%04x\n", etype);
> +		return NULL;
> +	}
> +
> +	/* Parse Protocol */
> +	proto = ntohs(tag[1]) >> 8;
> +	if (unlikely(proto != RTL8_4_PROTOCOL_RTL8365MB)) {
> +		dev_warn_ratelimited(&dev->dev,
> +				     "unknown realtek protocol 0x%02x\n",
> +				     proto);
> +		return NULL;
> +	}
> +
> +	/* Parse TX (switch->CPU) */
> +	port = ntohs(tag[3]) & 0xf; /* Port number is the LSB 4 bits */
> +	skb->dev = dsa_master_find_slave(dev, 0, port);
> +	if (!skb->dev) {
> +		dev_warn_ratelimited(&dev->dev,
> +				     "could not find slave for port %d\n",
> +				     port);
> +		return NULL;
> +	}
> +
> +	/* Remove tag and recalculate checksum */
> +	skb_pull_rcsum(skb, RTL8_4_TAG_LEN);
> +
> +	dsa_strip_etype_header(skb, RTL8_4_TAG_LEN);
> +
> +	dsa_default_offload_fwd_mark(skb);
> +
> +	return skb;
> +}
> +
> +static const struct dsa_device_ops rtl8_4_netdev_ops = {
> +	.name = "rtl8_4",
> +	.proto = DSA_TAG_PROTO_RTL8_4,
> +	.xmit = rtl8_4_tag_xmit,
> +	.rcv = rtl8_4_tag_rcv,
> +	.needed_headroom = RTL8_4_TAG_LEN,
> +};
> +module_dsa_tag_driver(rtl8_4_netdev_ops);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_RTL8_4);
> -- 
> 2.32.0
> 

Powered by blists - more mailing lists