lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211012163613.30030-7-biju.das.jz@bp.renesas.com>
Date:   Tue, 12 Oct 2021 17:36:05 +0100
From:   Biju Das <biju.das.jz@...renesas.com>
To:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     Biju Das <biju.das.jz@...renesas.com>,
        Sergey Shtylyov <s.shtylyov@....ru>,
        Sergei Shtylyov <sergei.shtylyov@...il.com>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Sergey Shtylyov <s.shtylyov@...russia.ru>,
        Adam Ford <aford173@...il.com>, Andrew Lunn <andrew@...n.ch>,
        Yuusuke Ashizuka <ashiduka@...itsu.com>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
        netdev@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
        Chris Paterson <Chris.Paterson2@...esas.com>,
        Biju Das <biju.das@...renesas.com>,
        Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: [PATCH net-next v3 06/14] ravb: Fillup ravb_rx_gbeth() stub

Fillup ravb_rx_gbeth() function to support RZ/G2L.

This patch also renames ravb_rcar_rx to ravb_rx_rcar to be
consistent with the naming convention used in sh_eth driver.

Signed-off-by: Biju Das <biju.das.jz@...renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@....ru>
---
v2->v3:
 * Added Sergey's Rb tag
V1->V2:
 * Removed the unrelated comment "GbEthernet TOE Hardware checksum status"
   and macros TOE_IPV4_RX_CSUM_OK and TOE_IPV6_RX_CSUM_OK which is accidentally
   introduced as part of RFC discussion.
RFC->v1:
 * Removed ravb_rx_csum_gbeth() and will post this as seperate RFC 
   patch.
---
 drivers/net/ethernet/renesas/ravb.h      |   1 +
 drivers/net/ethernet/renesas/ravb_main.c | 146 ++++++++++++++++++++++-
 2 files changed, 142 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index e9de3f8306ce..99164318db26 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -1043,6 +1043,7 @@ struct ravb_private {
 	struct ravb_ex_rx_desc *rx_ring[NUM_RX_QUEUE];
 	struct ravb_tx_desc *tx_ring[NUM_TX_QUEUE];
 	void *tx_align[NUM_TX_QUEUE];
+	struct sk_buff *rx_1st_skb;
 	struct sk_buff **rx_skb[NUM_RX_QUEUE];
 	struct sk_buff **tx_skb[NUM_TX_QUEUE];
 	u32 rx_over_errors;
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index f7ce9b6e596f..1a5ebc58682d 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -734,15 +734,151 @@ static void ravb_rx_csum(struct sk_buff *skb)
 	skb_trim(skb, skb->len - sizeof(__sum16));
 }
 
+static struct sk_buff *ravb_get_skb_gbeth(struct net_device *ndev, int entry,
+					  struct ravb_rx_desc *desc)
+{
+	struct ravb_private *priv = netdev_priv(ndev);
+	struct sk_buff *skb;
+
+	skb = priv->rx_skb[RAVB_BE][entry];
+	priv->rx_skb[RAVB_BE][entry] = NULL;
+	dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr),
+			 ALIGN(GBETH_RX_BUFF_MAX, 16), DMA_FROM_DEVICE);
+
+	return skb;
+}
+
 /* Packet receive function for Gigabit Ethernet */
 static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q)
 {
-	/* Place holder */
-	return true;
+	struct ravb_private *priv = netdev_priv(ndev);
+	const struct ravb_hw_info *info = priv->info;
+	struct net_device_stats *stats;
+	struct ravb_rx_desc *desc;
+	struct sk_buff *skb;
+	dma_addr_t dma_addr;
+	u8  desc_status;
+	int boguscnt;
+	u16 pkt_len;
+	u8  die_dt;
+	int entry;
+	int limit;
+
+	entry = priv->cur_rx[q] % priv->num_rx_ring[q];
+	boguscnt = priv->dirty_rx[q] + priv->num_rx_ring[q] - priv->cur_rx[q];
+	stats = &priv->stats[q];
+
+	boguscnt = min(boguscnt, *quota);
+	limit = boguscnt;
+	desc = &priv->gbeth_rx_ring[entry];
+	while (desc->die_dt != DT_FEMPTY) {
+		/* Descriptor type must be checked before all other reads */
+		dma_rmb();
+		desc_status = desc->msc;
+		pkt_len = le16_to_cpu(desc->ds_cc) & RX_DS;
+
+		if (--boguscnt < 0)
+			break;
+
+		/* We use 0-byte descriptors to mark the DMA mapping errors */
+		if (!pkt_len)
+			continue;
+
+		if (desc_status & MSC_MC)
+			stats->multicast++;
+
+		if (desc_status & (MSC_CRC | MSC_RFE | MSC_RTSF | MSC_RTLF | MSC_CEEF)) {
+			stats->rx_errors++;
+			if (desc_status & MSC_CRC)
+				stats->rx_crc_errors++;
+			if (desc_status & MSC_RFE)
+				stats->rx_frame_errors++;
+			if (desc_status & (MSC_RTLF | MSC_RTSF))
+				stats->rx_length_errors++;
+			if (desc_status & MSC_CEEF)
+				stats->rx_missed_errors++;
+		} else {
+			die_dt = desc->die_dt & 0xF0;
+			switch (die_dt) {
+			case DT_FSINGLE:
+				skb = ravb_get_skb_gbeth(ndev, entry, desc);
+				skb_put(skb, pkt_len);
+				skb->protocol = eth_type_trans(skb, ndev);
+				napi_gro_receive(&priv->napi[q], skb);
+				stats->rx_packets++;
+				stats->rx_bytes += pkt_len;
+				break;
+			case DT_FSTART:
+				priv->rx_1st_skb = ravb_get_skb_gbeth(ndev, entry, desc);
+				skb_put(priv->rx_1st_skb, pkt_len);
+				break;
+			case DT_FMID:
+				skb = ravb_get_skb_gbeth(ndev, entry, desc);
+				skb_copy_to_linear_data_offset(priv->rx_1st_skb,
+							       priv->rx_1st_skb->len,
+							       skb->data,
+							       pkt_len);
+				skb_put(priv->rx_1st_skb, pkt_len);
+				dev_kfree_skb(skb);
+				break;
+			case DT_FEND:
+				skb = ravb_get_skb_gbeth(ndev, entry, desc);
+				skb_copy_to_linear_data_offset(priv->rx_1st_skb,
+							       priv->rx_1st_skb->len,
+							       skb->data,
+							       pkt_len);
+				skb_put(priv->rx_1st_skb, pkt_len);
+				dev_kfree_skb(skb);
+				priv->rx_1st_skb->protocol =
+					eth_type_trans(priv->rx_1st_skb, ndev);
+				napi_gro_receive(&priv->napi[q],
+						 priv->rx_1st_skb);
+				stats->rx_packets++;
+				stats->rx_bytes += priv->rx_1st_skb->len;
+				break;
+			}
+		}
+
+		entry = (++priv->cur_rx[q]) % priv->num_rx_ring[q];
+		desc = &priv->gbeth_rx_ring[entry];
+	}
+
+	/* Refill the RX ring buffers. */
+	for (; priv->cur_rx[q] - priv->dirty_rx[q] > 0; priv->dirty_rx[q]++) {
+		entry = priv->dirty_rx[q] % priv->num_rx_ring[q];
+		desc = &priv->gbeth_rx_ring[entry];
+		desc->ds_cc = cpu_to_le16(GBETH_RX_DESC_DATA_SIZE);
+
+		if (!priv->rx_skb[q][entry]) {
+			skb = netdev_alloc_skb(ndev, info->max_rx_len);
+			if (!skb)
+				break;
+			ravb_set_buffer_align(skb);
+			dma_addr = dma_map_single(ndev->dev.parent,
+						  skb->data,
+						  GBETH_RX_BUFF_MAX,
+						  DMA_FROM_DEVICE);
+			skb_checksum_none_assert(skb);
+			/* We just set the data size to 0 for a failed mapping
+			 * which should prevent DMA  from happening...
+			 */
+			if (dma_mapping_error(ndev->dev.parent, dma_addr))
+				desc->ds_cc = cpu_to_le16(0);
+			desc->dptr = cpu_to_le32(dma_addr);
+			priv->rx_skb[q][entry] = skb;
+		}
+		/* Descriptor type must be set after all the above writes */
+		dma_wmb();
+		desc->die_dt = DT_FEMPTY;
+	}
+
+	*quota -= limit - (++boguscnt);
+
+	return boguscnt <= 0;
 }
 
 /* Packet receive function for Ethernet AVB */
-static bool ravb_rcar_rx(struct net_device *ndev, int *quota, int q)
+static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q)
 {
 	struct ravb_private *priv = netdev_priv(ndev);
 	const struct ravb_hw_info *info = priv->info;
@@ -2238,7 +2374,7 @@ static const struct ravb_hw_info ravb_gen3_hw_info = {
 	.rx_ring_free = ravb_rx_ring_free_rcar,
 	.rx_ring_format = ravb_rx_ring_format_rcar,
 	.alloc_rx_desc = ravb_alloc_rx_desc_rcar,
-	.receive = ravb_rcar_rx,
+	.receive = ravb_rx_rcar,
 	.set_rate = ravb_set_rate_rcar,
 	.set_feature = ravb_set_features_rcar,
 	.dmac_init = ravb_dmac_init_rcar,
@@ -2263,7 +2399,7 @@ static const struct ravb_hw_info ravb_gen2_hw_info = {
 	.rx_ring_free = ravb_rx_ring_free_rcar,
 	.rx_ring_format = ravb_rx_ring_format_rcar,
 	.alloc_rx_desc = ravb_alloc_rx_desc_rcar,
-	.receive = ravb_rcar_rx,
+	.receive = ravb_rx_rcar,
 	.set_rate = ravb_set_rate_rcar,
 	.set_feature = ravb_set_features_rcar,
 	.dmac_init = ravb_dmac_init_rcar,
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ