netdev - RE: [PATCH net-next v3 13/14] ravb: Update ravb_emac_init

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <OS0PR01MB59220334F9C1891BE848638D86B69@OS0PR01MB5922.jpnprd01.prod.outlook.com>
Date:   Tue, 12 Oct 2021 17:52:31 +0000
From:   Biju Das <biju.das.jz@...renesas.com>
To:     Sergey Shtylyov <s.shtylyov@....ru>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
CC:     Sergei Shtylyov <sergei.shtylyov@...il.com>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Sergey Shtylyov <s.shtylyov@...russia.ru>,
        Adam Ford <aford173@...il.com>, Andrew Lunn <andrew@...n.ch>,
        Yuusuke Ashizuka <ashiduka@...itsu.com>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-renesas-soc@...r.kernel.org" 
        <linux-renesas-soc@...r.kernel.org>,
        Chris Paterson <Chris.Paterson2@...esas.com>,
        Biju Das <biju.das@...renesas.com>,
        Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: RE: [PATCH net-next v3 13/14] ravb: Update ravb_emac_init_gbeth()

Hi Sergey,

Thanks for the feedback.

> Subject: Re: [PATCH net-next v3 13/14] ravb: Update ravb_emac_init_gbeth()
> 
> On 10/12/21 7:36 PM, Biju Das wrote:
> 
> > This patch enables Receive/Transmit port of TOE and removes the
> > setting of promiscuous bit from EMAC configuration mode register.
> >
> > This patch also update EMAC configuration mode comment from "PAUSE
> > prohibition" to "EMAC Mode: PAUSE prohibition; Duplex; TX; RX; CRC
> > Pass Through".
> 
>    I'm not sure why you set ECMR.RCPT while you don't have the checksum
> offloaded...
> 
> > Signed-off-by: Biju Das <biju.das.jz@...renesas.com>
> > ---
> > v2->v3:
> >  * Enabled TPE/RPE of TOE, as disabling causes loopback test to fail
> >  * Documented CSR0 register bits
> >  * Removed PRM setting from EMAC configuration mode
> >  * Updated EMAC configuration mode.
> > v1->v2:
> >  * No change
> > V1:
> >  * New patch.
> > ---
> >  drivers/net/ethernet/renesas/ravb.h      | 6 ++++++
> >  drivers/net/ethernet/renesas/ravb_main.c | 5 +++--
> >  2 files changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/renesas/ravb.h
> > b/drivers/net/ethernet/renesas/ravb.h
> > index 69a771526776..08062d73df10 100644
> > --- a/drivers/net/ethernet/renesas/ravb.h
> > +++ b/drivers/net/ethernet/renesas/ravb.h
> > @@ -204,6 +204,7 @@ enum ravb_reg {
> >  	TLFRCR	= 0x0758,
> >  	RFCR	= 0x0760,
> >  	MAFCR	= 0x0778,
> > +	CSR0    = 0x0800,	/* RZ/G2L only */
> >  };
> >
> >
> > @@ -964,6 +965,11 @@ enum CXR31_BIT {
> >  	CXR31_SEL_LINK1	= 0x00000008,
> >  };
> >
> > +enum CSR0_BIT {
> > +	CSR0_TPE	= 0x00000010,
> > +	CSR0_RPE	= 0x00000020,
> > +};
> > +
> 
>   Is this really needed if you have ECMR.RCPT cleared?

Yes it is required. Please see the current log and log with the changes you suggested

root@...rc-rzg2l:/rzg2l-test-scripts# ./eth_t_001.sh
[   39.646891] ravb 11c20000.ethernet eth0: Link is Down
[   39.715127] ravb 11c30000.ethernet eth1: Link is Down
[   39.895680] Microchip KSZ9131 Gigabit PHY 11c20000.ethernet-ffffffff:07: attached PHY driver (mii_bus:phy_addr=11c20000.ethernet-ffffffff:07, irq=POLL)
[   39.966370] Microchip KSZ9131 Gigabit PHY 11c30000.ethernet-ffffffff:07: attached PHY driver (mii_bus:phy_addr=11c30000.ethernet-ffffffff:07, irq=POLL)
[   42.988573] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   42.995119] ravb 11c20000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   43.052541] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   43.055710] ravb 11c30000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off

EXIT|PASS||[422391:43:00] ||

root@...rc-rzg2l:/rzg2l-test-scripts#


with the changes you suggested
----------------------------

root@...rc-rzg2l:/rzg2l-test-scripts# ./eth_t_001.sh
[   23.300520] ravb 11c20000.ethernet eth0: Link is Down
[   23.535604] ravb 11c30000.ethernet eth1: device will be stopped after h/w processes are done.
[   23.547267] ravb 11c30000.ethernet eth1: Link is Down
[   23.802667] Microchip KSZ9131 Gigabit PHY 11c20000.ethernet-ffffffff:07: attached PHY driver (mii_bus:phy_addr=11c20000.ethernet-ffffffff:07, irq=POLL)
[   24.031711] ravb 11c30000.ethernet eth1: failed to switch device to config mode
RTNETLINK answers: Connection timed out

EXIT|FAIL||[422391:42:32] Failed to bring up ETH1||

root@...rc-rzg2l:/rzg2l-test-scripts#



diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index f08d8f2b4d41..b34670a812fd 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -521,7 +521,7 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
 
        /* EMAC Mode: PAUSE prohibition; Duplex; TX; RX; CRC Pass Through */
        ravb_write(ndev, ECMR_ZPF | ((priv->duplex > 0) ? ECMR_DM : 0) |
-                        ECMR_TE | ECMR_RE | ECMR_RCPT |
+                        ECMR_TE | ECMR_RE | 
                         ECMR_TXF | ECMR_RXF, ECMR);
 
        ravb_set_rate_gbeth(ndev);
@@ -534,7 +534,7 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
 
        /* E-MAC status register clear */
        ravb_write(ndev, ECSR_ICD | ECSR_LCHNG | ECSR_PFRI, ECSR);
-       ravb_write(ndev, CSR0_TPE | CSR0_RPE, CSR0);
+       //ravb_write(ndev, CSR0_TPE | CSR0_RPE, CSR0);

Regards,
Biju

> 
> [...]
> 
> MBR, Sergey