lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <646d27a57e72c88bcba7f4f1362d998bbb742315.camel@oss.nxp.com>
Date:   Wed, 13 Oct 2021 15:28:12 +0200
From:   Sebastien Laveze <sebastien.laveze@....nxp.com>
To:     Richard Cochran <richardcochran@...il.com>
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        yangbo.lu@....com, yannick.vignon@....nxp.com,
        rui.sousa@....nxp.com
Subject: Re: [PATCH net-next] ptp: add vclock timestamp conversion IOCTL

On Wed, 2021-10-13 at 06:10 -0700, Richard Cochran wrote:
> That means no control over the phase of the output signals.  Super.

You have. There's just a small conversion to go from and to the low-
level hardware counter. (Which also needs to be done for rx/tx
timestamps btw) 
When programming an output signal you use this offset to have the right
phase.

> But you can't make the end users respect that.  In many cases in the
> wild, the GM offset changes suddenly for various reasons, and then the
> clients slew at max adjustment.  So there is no expectation of
> "limited frequency adjustments."

Even if very high, there are already some limitations which are driver
specific.
We wouldn't be changing the current "regular" API but only adding some
limitations in the specific case of virtual clocks usage (added by the
user btw). This is less limitating than preventing any adjustment at
all.

Thanks,
Sebastien

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ