netdev - Re: [RFC PATCH 15/17] net: ipa: Add IPA v2.6L initialization sequence support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <d7073ebb-03cd-bf2e-52fd-27cafe525a01@ieee.org>
Date:   Wed, 13 Oct 2021 17:30:45 -0500
From:   Alex Elder <elder@...e.org>
To:     Sireesh Kodali <sireeshkodali1@...il.com>,
        phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, elder@...nel.org
Cc:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Subject: Re: [RFC PATCH 15/17] net: ipa: Add IPA v2.6L initialization sequence
 support

On 9/19/21 10:08 PM, Sireesh Kodali wrote:
> The biggest changes are:
> 
> - Make SMP2P functions no-operation
> - Make resource init no-operation
> - Skip firmware loading
> - Add reset sequence

The only comments I have are not very major, so I'll wait
for a later review to suggest that sort of fine tuning.

					-Alex

> Signed-off-by: Sireesh Kodali <sireeshkodali1@...il.com>
> ---
>   drivers/net/ipa/ipa_main.c     | 19 ++++++++++++++++---
>   drivers/net/ipa/ipa_resource.c |  3 +++
>   drivers/net/ipa/ipa_smp2p.c    | 11 +++++++++--
>   3 files changed, 28 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ipa/ipa_main.c b/drivers/net/ipa/ipa_main.c
> index ea6c4347f2c6..b437fbf95edf 100644
> --- a/drivers/net/ipa/ipa_main.c
> +++ b/drivers/net/ipa/ipa_main.c
> @@ -355,12 +355,22 @@ static void ipa_hardware_config(struct ipa *ipa, const struct ipa_data *data)
>   	u32 granularity;
>   	u32 val;
>   
> +	if (ipa->version <= IPA_VERSION_2_6L) {
> +		iowrite32(1, ipa->reg_virt + IPA_REG_COMP_SW_RESET_OFFSET);
> +		iowrite32(0, ipa->reg_virt + IPA_REG_COMP_SW_RESET_OFFSET);
> +
> +		iowrite32(1, ipa->reg_virt + ipa_reg_comp_cfg_offset(ipa->version));
> +	}
> +
>   	/* IPA v4.5+ has no backward compatibility register */
> -	if (version < IPA_VERSION_4_5) {
> +	if (version >= IPA_VERSION_2_5 && version < IPA_VERSION_4_5) {
>   		val = data->backward_compat;
>   		iowrite32(val, ipa->reg_virt + ipa_reg_bcr_offset(ipa->version));
>   	}
>   
> +	if (ipa->version <= IPA_VERSION_2_6L)
> +		return;
> +
>   	/* Implement some hardware workarounds */
>   	if (version >= IPA_VERSION_4_0 && version < IPA_VERSION_4_5) {
>   		/* Disable PA mask to allow HOLB drop */
> @@ -412,7 +422,8 @@ static void ipa_hardware_config(struct ipa *ipa, const struct ipa_data *data)
>   static void ipa_hardware_deconfig(struct ipa *ipa)
>   {
>   	/* Mostly we just leave things as we set them. */
> -	ipa_hardware_dcd_deconfig(ipa);
> +	if (ipa->version > IPA_VERSION_2_6L)
> +		ipa_hardware_dcd_deconfig(ipa);
>   }
>   
>   /**
> @@ -765,8 +776,10 @@ static int ipa_probe(struct platform_device *pdev)
>   
>   	/* Otherwise we need to load the firmware and have Trust Zone validate
>   	 * and install it.  If that succeeds we can proceed with setup.
> +	 * But on IPA v2.6L we don't need to do firmware loading :D
>   	 */
> -	ret = ipa_firmware_load(dev);
> +	if (ipa->version > IPA_VERSION_2_6L)
> +		ret = ipa_firmware_load(dev);
>   	if (ret)
>   		goto err_deconfig;
>   
> diff --git a/drivers/net/ipa/ipa_resource.c b/drivers/net/ipa/ipa_resource.c
> index e3da95d69409..36a72324d828 100644
> --- a/drivers/net/ipa/ipa_resource.c
> +++ b/drivers/net/ipa/ipa_resource.c
> @@ -162,6 +162,9 @@ int ipa_resource_config(struct ipa *ipa, const struct ipa_resource_data *data)
>   {
>   	u32 i;
>   
> +	if (ipa->version <= IPA_VERSION_2_6L)
> +		return 0;
> +
>   	if (!ipa_resource_limits_valid(ipa, data))
>   		return -EINVAL;
>   
> diff --git a/drivers/net/ipa/ipa_smp2p.c b/drivers/net/ipa/ipa_smp2p.c
> index df7639c39d71..fa4a9f1c196a 100644
> --- a/drivers/net/ipa/ipa_smp2p.c
> +++ b/drivers/net/ipa/ipa_smp2p.c
> @@ -233,6 +233,10 @@ int ipa_smp2p_init(struct ipa *ipa, bool modem_init)
>   	u32 valid_bit;
>   	int ret;
>   
> +	/* With IPA v2.6L and earlier SMP2P interrupts are used */
> +	if (ipa->version <= IPA_VERSION_2_6L)
> +		return 0;
> +
>   	valid_state = qcom_smem_state_get(dev, "ipa-clock-enabled-valid",
>   					  &valid_bit);
>   	if (IS_ERR(valid_state))
> @@ -302,6 +306,9 @@ void ipa_smp2p_exit(struct ipa *ipa)
>   {
>   	struct ipa_smp2p *smp2p = ipa->smp2p;
>   
> +	if (!smp2p)
> +		return;
> +
>   	if (smp2p->setup_ready_irq)
>   		ipa_smp2p_irq_exit(smp2p, smp2p->setup_ready_irq);
>   	ipa_smp2p_panic_notifier_unregister(smp2p);
> @@ -317,7 +324,7 @@ void ipa_smp2p_disable(struct ipa *ipa)
>   {
>   	struct ipa_smp2p *smp2p = ipa->smp2p;
>   
> -	if (!smp2p->setup_ready_irq)
> +	if (!smp2p || !smp2p->setup_ready_irq)
>   		return;
>   
>   	mutex_lock(&smp2p->mutex);
> @@ -333,7 +340,7 @@ void ipa_smp2p_notify_reset(struct ipa *ipa)
>   	struct ipa_smp2p *smp2p = ipa->smp2p;
>   	u32 mask;
>   
> -	if (!smp2p->notified)
> +	if (!smp2p || !smp2p->notified)
>   		return;
>   
>   	ipa_smp2p_power_release(ipa);
>