netdev - Re: [PATCH net-next 5/6] net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 13 Oct 2021 08:33:36 +0000
From:   Alvin Šipraga <ALSI@...g-olufsen.dk>
To:     Jakub Kicinski <kuba@...nel.org>,
        Alvin Šipraga <alvin@...s.dk>
CC:     Linus Walleij <linus.walleij@...aro.org>,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Rob Herring <robh+dt@...nel.org>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Michael Rasmussen <MIR@...g-olufsen.dk>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next 5/6] net: dsa: realtek-smi: add rtl8365mb
 subdriver for RTL8365MB-VC

On 10/12/21 5:27 PM, Jakub Kicinski wrote:
> On Tue, 12 Oct 2021 14:35:54 +0200 Alvin Šipraga wrote:
>> +	{ 0, 4, 2, "dot3StatsFCSErrors" },
>> +	{ 0, 6, 2, "dot3StatsSymbolErrors" },
>> +	{ 0, 8, 2, "dot3InPauseFrames" },
>> +	{ 0, 10, 2, "dot3ControlInUnknownOpcodes" },
> ...
> 
> You must expose counters via existing standard APIs.
> 
> You should implement these ethtool ops:

I implement the dsa_switch_ops callback .get_ethtool_stats, using an 
existing function rtl8366_get_ethtool_stats in the switch helper library 
rtl8366.c. It was my understanding that this is the correct way to 
expose counters within the DSA framework - please correct me if that is 
wrong.

The structure you highlight is just some internal glue to sort out the 
internal register mapping. I borrowed the approach from the existing 
rtl8366rb.c Realtek SMI subdriver.

> 
> 	void	(*get_eth_phy_stats)(struct net_device *dev,
> 				     struct ethtool_eth_phy_stats *phy_stats);
> 	void	(*get_eth_mac_stats)(struct net_device *dev,
> 				     struct ethtool_eth_mac_stats *mac_stats);
> 	void	(*get_eth_ctrl_stats)(struct net_device *dev,
> 				      struct ethtool_eth_ctrl_stats *ctrl_stats);
> 	void	(*get_rmon_stats)(struct net_device *dev,
> 				  struct ethtool_rmon_stats *rmon_stats,
> 				  const struct ethtool_rmon_hist_range **ranges);
> 
>> +static int rtl8365mb_setup(struct dsa_switch *ds)
>> +{
>> +	struct realtek_smi *smi = ds->priv;
>> +	struct rtl8365mb *mb;
>> +	int ret;
>> +	int i;
>> +
>> +	mb = smi->chip_data;
> 
> drivers/net/dsa/rtl8365mb.c:1428:20: warning: variable ‘mb’ set but not used [-Wunused-but-set-variable]
>   1428 |  struct rtl8365mb *mb;
>        |                    ^~
> 

Woops, I will fix this in v2. Thanks.