netdev - Re: [PATCH RFC linux] dt-bindings: nvmem: Add binding for U-Boot environment NVMEM provider

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <857c27a6-5c4b-e0ed-a830-35762799613f@linaro.org>
Date:   Thu, 14 Oct 2021 11:30:13 +0100
From:   Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To:     Marek Behún <kabel@...nel.org>
Cc:     robh+dt@...nel.org, devicetree@...r.kernel.org,
        U-Boot Mailing List <u-boot@...ts.denx.de>,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        Luka Kovacic <luka.kovacic@...tura.hr>
Subject: Re: [PATCH RFC linux] dt-bindings: nvmem: Add binding for U-Boot
 environment NVMEM provider



On 14/10/2021 11:06, Marek Behún wrote:
> On Thu, 14 Oct 2021 09:26:27 +0100
> Srinivas Kandagatla <srinivas.kandagatla@...aro.org> wrote:
> 
>> On 14/10/2021 00:20, Marek Behún wrote:
>>> Add device tree bindings for U-Boot environment NVMEM provider.
>>>
>>> U-Boot environment can be stored at a specific offset of a MTD
>>> device, EEPROM, MMC, NAND or SATA device, on an UBI volume, or in a
>>> file on a filesystem.
>>>
>>> The environment can contain information such as device's MAC
>>> address, which should be used by the ethernet controller node.
>>>    
>>
>> Have you looked at
>> ./Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml ?
> 
> Hello srini,
> 
> yes, I have. What about it? :)
> 
> That binding won't work for u-boot-env, because the data are stored
> in a different way. A cell does not have a constant predetermined
> offset on the MTD.

Can't you dynamically update the nodes before nvmem-provider is registered?

> The variables are stored as a sequence of values of format
> "name=value", separated by '\0's, for example:
>    board=turris_mox\0ethaddr=00:11:22:33:44:55\0bootcmd=run distro_bootcmd\0....
> Chaning lengths of values of variables, or deleting variables, moves
> the data around. Integers and MAC addresses are stored as strings, and so on.
> 

Do you already have a provider driver for handing this.

How is pre parsing cell info and post processing data planned to be handled?

Currently in nvmem core we do check for "reg" property for each cell, 
unless the provider driver is adding/updating dt entries dynamically 
before registering nvmem provider, It will not work as it is. Alteast 
this is what I suggested in similar case where cell information is in 
tlv format.

Secondly mac-address seems to be delimited, we recently introduced post 
processing callback for provider driver [1], which should help in this case.

If the nvmem-cell names are standard like "mac-address" then you do not 
need to add a new "type" binding to cell too, you can do post-processing 
based on name.

[1] 
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/nvmem/imx-ocotp.c?id=823571f8c6f8968d8f14e91972fa350ce200f5db


--srini

> Also the mtd/partitions/nvmem-cells.yaml doesn't take into account
> u-boot-env stored on non-MTD devices.
> 
> Marek
> 
>    
>