netdev - [PATCH net-next 01/12] ethernet: adaptec: use eth_hw_addr

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211015221652.827253-2-kuba@kernel.org>
Date:   Fri, 15 Oct 2021 15:16:41 -0700
From:   Jakub Kicinski <kuba@...nel.org>
To:     davem@...emloft.net
Cc:     netdev@...r.kernel.org, Jakub Kicinski <kuba@...nel.org>,
        ionut@...ula.org
Subject: [PATCH net-next 01/12] ethernet: adaptec: use eth_hw_addr_set()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Read the address into an array on the stack, then call
eth_hw_addr_set().

Signed-off-by: Jakub Kicinski <kuba@...nel.org>
---
CC: ionut@...ula.org
---
 drivers/net/ethernet/adaptec/starfire.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/adaptec/starfire.c b/drivers/net/ethernet/adaptec/starfire.c
index 16b6b83f670b..c6982f7caf9b 100644
--- a/drivers/net/ethernet/adaptec/starfire.c
+++ b/drivers/net/ethernet/adaptec/starfire.c
@@ -641,6 +641,7 @@ static int starfire_init_one(struct pci_dev *pdev,
 	struct netdev_private *np;
 	int i, irq, chip_idx = ent->driver_data;
 	struct net_device *dev;
+	u8 addr[ETH_ALEN];
 	long ioaddr;
 	void __iomem *base;
 	int drv_flags, io_size;
@@ -696,7 +697,8 @@ static int starfire_init_one(struct pci_dev *pdev,
 
 	/* Serial EEPROM reads are hidden by the hardware. */
 	for (i = 0; i < 6; i++)
-		dev->dev_addr[i] = readb(base + EEPROMCtrl + 20 - i);
+		addr[i] = readb(base + EEPROMCtrl + 20 - i);
+	eth_hw_addr_set(dev, addr);
 
 #if ! defined(final_version) /* Dump the EEPROM contents during development. */
 	if (debug > 4)
-- 
2.31.1