netdev - [pull request][net-next 00/13] mlx5 updates 2021-10-15

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211016003902.57116-1-saeed@kernel.org>
Date:   Fri, 15 Oct 2021 17:38:49 -0700
From:   Saeed Mahameed <saeed@...nel.org>
To:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     netdev@...r.kernel.org, Saeed Mahameed <saeedm@...dia.com>
Subject: [pull request][net-next 00/13] mlx5 updates 2021-10-15

From: Saeed Mahameed <saeedm@...dia.com>

Hi Dave, Jakub,

This series provides updates to mlx5 driver.

For more information please see tag log below.

Please pull and let me know if there is any problem.

Thanks,
Saeed.

---
The following changes since commit 295711fa8fec42a55623bf6997d05a21d7855132:

  Merge branch 'dpaa2-irq-coalescing' (2021-10-15 14:32:41 +0100)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git tags/mlx5-updates-2021-10-15

for you to fetch changes up to 8a543184d79c83d0887c25cf202a43559ba39583:

  net/mlx5: Use system_image_guid to determine bonding (2021-10-15 17:37:47 -0700)

----------------------------------------------------------------
mlx5-updates-2021-10-15

1) From Rongwei Liu:

Use system_image_guid and native_port_num when bonding.
Don't relay on PCIe ids anymore.

With some specific NIC, the physical devices may have PCIe IDs like
0001:01:00.0/1 and 0002:02:00.0/1. All of these devices should have
the same system_image_guid and device index can be queried from
native_port_num.

For matching sibling devices/port of the same HCA, compare the HCA
GUID reported on each device rather than just assuming PCIe ids have
similar attributes.

2) From Amir Tzin: Use HCA defined Timouts

Replace hard coded timeouts with values stored by firmware in default
timeouts register (DTOR). Timeouts are read during driver load. If DTOR
is not supported by firmware then fallback to hard coded defaults
instead.

3) From Shay Drory: Disable roce at HCA level
Disable RoCE in Firmware when devlink roce parameter is set to off.

4) A small set of trivial cleanups

----------------------------------------------------------------
Abhiram R N (1):
      net/mlx5e: Add extack msgs related to TC for better debug

Amir Tzin (3):
      net/mlx5: Add layout to support default timeouts register
      net/mlx5: Read timeout values from init segment
      net/mlx5: Read timeout values from DTOR

Len Baker (1):
      net/mlx5: DR, Prefer kcalloc over open coded arithmetic

Moosa Baransi (1):
      net/mlx5i: Enable Rx steering for IPoIB via ethtool

Paul Blakey (1):
      net/mlx5: CT: Fix missing cleanup of ct nat table on init failure

Rongwei Liu (4):
      net/mlx5: Check return status first when querying system_image_guid
      net/mlx5: Introduce new device index wrapper
      net/mlx5: Use native_port_num as 1st option of device index
      net/mlx5: Use system_image_guid to determine bonding

Shay Drory (1):
      net/mlx5: Disable roce at HCA level

Vlad Buslov (1):
      net/mlx5: Bridge, provide flow source hints

 drivers/net/ethernet/mellanox/mlx5/core/Makefile   |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      |  18 ++-
 drivers/net/ethernet/mellanox/mlx5/core/dev.c      |  14 +-
 drivers/net/ethernet/mellanox/mlx5/core/devlink.c  |   3 +-
 .../net/ethernet/mellanox/mlx5/core/en/devlink.c   |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en/fs.h    |   8 +-
 .../net/ethernet/mellanox/mlx5/core/en/health.h    |   1 -
 .../ethernet/mellanox/mlx5/core/en/reporter_rx.c   |   7 +-
 .../ethernet/mellanox/mlx5/core/en/reporter_tx.c   |   7 +-
 drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c |   1 +
 .../net/ethernet/mellanox/mlx5/core/en_ethtool.c   |   6 +-
 .../ethernet/mellanox/mlx5/core/en_fs_ethtool.c    |   6 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    | 106 ++++++++++----
 .../net/ethernet/mellanox/mlx5/core/esw/bridge.c   |   4 +
 .../ethernet/mellanox/mlx5/core/esw/devlink_port.c |   4 +-
 .../ethernet/mellanox/mlx5/core/eswitch_offloads.c |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/fw.c       |   9 +-
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c |  16 +-
 drivers/net/ethernet/mellanox/mlx5/core/health.c   |  21 ++-
 .../ethernet/mellanox/mlx5/core/ipoib/ethtool.c    |  30 ++++
 .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c  |   3 +
 drivers/net/ethernet/mellanox/mlx5/core/lag.c      |   4 +-
 drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c | 162 +++++++++++++++++++++
 drivers/net/ethernet/mellanox/mlx5/core/lib/tout.h |  41 ++++++
 drivers/net/ethernet/mellanox/mlx5/core/main.c     |  69 ++++++---
 .../net/ethernet/mellanox/mlx5/core/pagealloc.c    |  16 +-
 .../net/ethernet/mellanox/mlx5/core/sf/devlink.c   |   2 +-
 .../mellanox/mlx5/core/steering/dr_action.c        |   8 +-
 drivers/net/ethernet/mellanox/mlx5/core/vport.c    |  21 +--
 include/linux/mlx5/device.h                        |   4 +-
 include/linux/mlx5/driver.h                        |  25 +++-
 include/linux/mlx5/mlx5_ifc.h                      |  40 ++++-
 32 files changed, 529 insertions(+), 133 deletions(-)
 create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c
 create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/tout.h