| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 17 Oct 2021 16:56:45 +0200
From: Ansuel Smith <ansuelsmth@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Ansuel Smith <ansuelsmth@...il.com>
Subject: [net-next RESEND PATCH 1/2] net: dsa: qca8k: tidy for loop in setup and add cpu port check
Tidy and organize qca8k setup function from multiple for loop.
Change for loop in bridge leave/join to scan all port and skip cpu port.
No functional change intended.
Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
---
drivers/net/dsa/qca8k.c | 74 ++++++++++++++++++++++++-----------------
1 file changed, 44 insertions(+), 30 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 2b0aadb0114c..ba0411d4c5ae 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1122,28 +1122,34 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
dev_warn(priv->dev, "mib init failed");
- /* Enable QCA header mode on the cpu port */
- ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port),
- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
- if (ret) {
- dev_err(priv->dev, "failed enabling QCA header mode");
- return ret;
- }
-
- /* Disable forwarding by default on all ports */
+ /* Initial setup of all ports */
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ /* Disable forwarding by default on all ports */
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER, 0);
if (ret)
return ret;
- }
- /* Disable MAC by default on all ports */
- for (i = 1; i < QCA8K_NUM_PORTS; i++)
- qca8k_port_set_status(priv, i, 0);
+ /* Enable QCA header mode on all cpu ports */
+ if (dsa_is_cpu_port(ds, i)) {
+ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
+ if (ret) {
+ dev_err(priv->dev, "failed enabling QCA header mode");
+ return ret;
+ }
+ }
- /* Forward all unknown frames to CPU port for Linux processing */
+ /* Disable MAC by default on all user ports */
+ if (dsa_is_user_port(ds, i))
+ qca8k_port_set_status(priv, i, 0);
+ }
+
+ /* Forward all unknown frames to CPU port for Linux processing
+ * Notice that in multi-cpu config only one port should be set
+ * for igmp, unknown, multicast and broadcast packet
+ */
ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
@@ -1152,11 +1158,13 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
- /* Setup connection between CPU port & user ports */
+ /* Setup connection between CPU port & user ports
+ * Configure specific switch configuration for ports
+ */
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
/* CPU port gets connected to all user ports of the switch */
if (dsa_is_cpu_port(ds, i)) {
- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port),
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
if (ret)
return ret;
@@ -1193,16 +1201,14 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
}
- }
- /* The port 5 of the qca8337 have some problem in flood condition. The
- * original legacy driver had some specific buffer and priority settings
- * for the different port suggested by the QCA switch team. Add this
- * missing settings to improve switch stability under load condition.
- * This problem is limited to qca8337 and other qca8k switch are not affected.
- */
- if (priv->switch_id == QCA8K_ID_QCA8337) {
- for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ /* The port 5 of the qca8337 have some problem in flood condition. The
+ * original legacy driver had some specific buffer and priority settings
+ * for the different port suggested by the QCA switch team. Add this
+ * missing settings to improve switch stability under load condition.
+ * This problem is limited to qca8337 and other qca8k switch are not affected.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8337) {
switch (i) {
/* The 2 CPU port and port 5 requires some different
* priority than any other ports.
@@ -1238,6 +1244,12 @@ qca8k_setup(struct dsa_switch *ds)
QCA8K_PORT_HOL_CTRL1_WRED_EN,
mask);
}
+
+ /* Set initial MTU for every port.
+ * We have only have a general MTU setting. So track
+ * every port and set the max across all port.
+ */
+ priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
}
/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
@@ -1251,8 +1263,6 @@ qca8k_setup(struct dsa_switch *ds)
}
/* Setup our port MTUs to match power on defaults */
- for (i = 0; i < QCA8K_NUM_PORTS; i++)
- priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
if (ret)
dev_warn(priv->dev, "failed setting MTU settings");
@@ -1728,7 +1738,9 @@ qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br)
cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
port_mask = BIT(cpu_port);
- for (i = 1; i < QCA8K_NUM_PORTS; i++) {
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (dsa_is_cpu_port(ds, i))
+ continue;
if (dsa_to_port(ds, i)->bridge_dev != br)
continue;
/* Add this port to the portvlan mask of the other ports
@@ -1758,7 +1770,9 @@ qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br)
cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
- for (i = 1; i < QCA8K_NUM_PORTS; i++) {
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (dsa_is_cpu_port(ds, i))
+ continue;
if (dsa_to_port(ds, i)->bridge_dev != br)
continue;
/* Remove this port to the portvlan mask of the other ports
--
2.32.0
Powered by blists - more mailing lists