[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211018093804.3115191-1-alvin@pqrs.dk>
Date: Mon, 18 Oct 2021 11:37:55 +0200
From: Alvin Šipraga <alvin@...s.dk>
To: Linus Walleij <linus.walleij@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>
Cc: arinc.unal@...nc9.com,
Alvin Šipraga <alsi@...g-olufsen.dk>,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v4 net-next 0/7] net: dsa: add support for RTL8365MB-VC
From: Alvin Šipraga <alsi@...g-olufsen.dk>
This series adds support for Realtek's RTL8365MB-VC, a 4+1 port
10/100/1000M Ethernet switch. The driver - rtl8365mb - was developed by
Michael Ramussen and myself.
This version of the driver is relatively slim, implementing only the
standalone port functionality and no offload capabilities. It is based
on a previous RFC series [1] from August, and the main difference is the
removal of some spurious VLAN operations. Otherwise I have simply
addressed most of the feedback. Please see the respective patches for
more detail.
In parallel I am working on offloading the bridge layer capabilities,
but I would like to get the basic stuff upstreamed as soon as possible.
v3 -> v4:
- get irq before setting virq parents (fixes kernel test robot
warning)
- remove pad-to-72-bytes logic in tagger xmit (fixes DENG Qingfang's
suggestion); no longer needed as we set CPU minimum RX size to 64
bytes
- use mutex to protect MIB counter access instead of a spinlock (fixes
Jakub's feedback on v3 statistics refactoring)
v2 -> v3:
- move IRQ setup earlier in probe per Florian's suggestion
- fix compilation error on some archs due to FIELD_PREP use in v1
- follow Jakub's suggestion and use the standard ethtool stats API;
NOTE: new patch in the series for relevant DSA plumbing
- following the stats change, it became apparent that the rtl8366
helper library is no longer that helpful; scrap it and implement
the ethtool ops specifically for this chip
v1 -> v2:
- drop DSA port type checks during MAC configuration
- use OF properties to configure RGMII TX/RX delay
- don't set default fwd_offload_mark if packet is trapped to CPU
- remove port mapping macros
- update device tree bindings documentation with an example
- cosmetic changes to the tagging driver using FIELD_* macros
[1] https://lore.kernel.org/netdev/20210822193145.1312668-1-alvin@pqrs.dk/
Alvin Šipraga (7):
ether: add EtherType for proprietary Realtek protocols
net: dsa: allow reporting of standard ethtool stats for slave devices
net: dsa: move NET_DSA_TAG_RTL4_A to right place in Kconfig/Makefile
dt-bindings: net: dsa: realtek-smi: document new compatible rtl8365mb
net: dsa: tag_rtl8_4: add realtek 8 byte protocol 4 tag
net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC
net: phy: realtek: add support for RTL8365MB-VC internal PHYs
.../bindings/net/dsa/realtek-smi.txt | 87 +
drivers/net/dsa/Kconfig | 1 +
drivers/net/dsa/Makefile | 2 +-
drivers/net/dsa/realtek-smi-core.c | 4 +
drivers/net/dsa/realtek-smi-core.h | 1 +
drivers/net/dsa/rtl8365mb.c | 1982 +++++++++++++++++
drivers/net/phy/realtek.c | 8 +
include/net/dsa.h | 8 +
include/uapi/linux/if_ether.h | 1 +
net/dsa/Kconfig | 20 +-
net/dsa/Makefile | 3 +-
net/dsa/slave.c | 34 +
net/dsa/tag_rtl8_4.c | 178 ++
13 files changed, 2320 insertions(+), 9 deletions(-)
create mode 100644 drivers/net/dsa/rtl8365mb.c
create mode 100644 net/dsa/tag_rtl8_4.c
--
2.32.0
Powered by blists - more mailing lists