[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211020113613.815210-2-vladimir.oltean@nxp.com>
Date: Wed, 20 Oct 2021 14:36:11 +0300
From: Vladimir Oltean <vladimir.oltean@....com>
To: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Li Yang <leoyang.li@....com>,
Oleksij Rempel <o.rempel@...gutronix.de>,
Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH devicetree 1/3] ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch
In the new behavior, the sja1105 driver expects there to be explicit
RGMII delays present on the fixed-link ports, otherwise it will complain
that it falls back to legacy behavior, which is to apply RGMII delays
incorrectly derived from the phy-mode string.
In this case, the legacy behavior of the driver is to apply both RX and
TX delays. To preserve that, add explicit 2 nanosecond delays, which are
identical with what the driver used to add (a 90 degree phase shift).
The delays from the phy-mode are ignored by new kernels (it's still
RGMII as long as it's "rgmii*" something), and the explicit
{rx,tx}-internal-delay-ps properties are ignored by old kernels, so the
change works both ways.
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
arch/arm/boot/dts/imx6qp-prtwd3.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts
index 7648e8a02000..cf6571cc4682 100644
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts
@@ -178,6 +178,8 @@ port@4 {
label = "cpu";
ethernet = <&fec>;
phy-mode = "rgmii-id";
+ rx-internal-delay-ps = <2000>;
+ tx-internal-delay-ps = <2000>;
fixed-link {
speed = <100>;
--
2.25.1
Powered by blists - more mailing lists