[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211020155617.1721694-12-kuba@kernel.org>
Date: Wed, 20 Oct 2021 08:56:16 -0700
From: Jakub Kicinski <kuba@...nel.org>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, Jakub Kicinski <kuba@...nel.org>
Subject: [PATCH net-next 11/12] net: sb1000,rionet: use eth_hw_addr_set()
Get these two oldies ready for constant netdev->dev_addr.
Signed-off-by: Jakub Kicinski <kuba@...nel.org>
---
drivers/net/rionet.c | 14 ++++++++------
drivers/net/sb1000.c | 12 ++++++++----
2 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index 2056d6ad04b5..1a95f3beb784 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -482,6 +482,7 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev)
{
int rc = 0;
struct rionet_private *rnet;
+ u8 addr[ETH_ALEN];
u16 device_id;
const size_t rionet_active_bytes = sizeof(void *) *
RIO_MAX_ROUTE_ENTRIES(mport->sys_size);
@@ -501,12 +502,13 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev)
/* Set the default MAC address */
device_id = rio_local_get_device_id(mport);
- ndev->dev_addr[0] = 0x00;
- ndev->dev_addr[1] = 0x01;
- ndev->dev_addr[2] = 0x00;
- ndev->dev_addr[3] = 0x01;
- ndev->dev_addr[4] = device_id >> 8;
- ndev->dev_addr[5] = device_id & 0xff;
+ addr[0] = 0x00;
+ addr[1] = 0x01;
+ addr[2] = 0x00;
+ addr[3] = 0x01;
+ addr[4] = device_id >> 8;
+ addr[5] = device_id & 0xff;
+ eth_hw_addr_set(ndev, addr);
ndev->netdev_ops = &rionet_netdev_ops;
ndev->mtu = RIONET_MAX_MTU;
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index f01c9db01b16..57a6d598467b 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -149,6 +149,7 @@ sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id)
unsigned short ioaddr[2], irq;
unsigned int serial_number;
int error = -ENODEV;
+ u8 addr[ETH_ALEN];
if (pnp_device_attach(pdev) < 0)
return -ENODEV;
@@ -203,10 +204,13 @@ sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id)
dev->netdev_ops = &sb1000_netdev_ops;
/* hardware address is 0:0:serial_number */
- dev->dev_addr[2] = serial_number >> 24 & 0xff;
- dev->dev_addr[3] = serial_number >> 16 & 0xff;
- dev->dev_addr[4] = serial_number >> 8 & 0xff;
- dev->dev_addr[5] = serial_number >> 0 & 0xff;
+ addr[0] = 0;
+ addr[1] = 0;
+ addr[2] = serial_number >> 24 & 0xff;
+ addr[3] = serial_number >> 16 & 0xff;
+ addr[4] = serial_number >> 8 & 0xff;
+ addr[5] = serial_number >> 0 & 0xff;
+ eth_hw_addr_set(dev, addr);
pnp_set_drvdata(pdev, dev);
--
2.31.1
Powered by blists - more mailing lists