| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211020105602.770329-3-vladimir.oltean@nxp.com>
Date: Wed, 20 Oct 2021 13:55:59 +0300
From: Vladimir Oltean <vladimir.oltean@....com>
To: netdev@...r.kernel.org, Jakub Kicinski <kuba@...nel.org>,
"David S. Miller" <davem@...emloft.net>, Po Liu <po.liu@....com>
Cc: Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
Yangbo Lu <yangbo.lu@....com>,
Hongbo Wang <hongbo.wang@....com>,
Xiaoliang Yang <xiaoliang.yang_1@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Claudiu Manoil <claudiu.manoil@....com>,
UNGLinuxDriver@...rochip.com
Subject: [PATCH net-next 2/5] net: mscc: ocelot: convert the VLAN masks to a list
First and foremost, the driver currently allocates a constant sized
4K * u32 (16KB memory) array for the VLAN masks. However, a typical
application might not need so many VLANs, so if we dynamically allocate
the memory as needed, we might actually save some space.
Secondly, we'll need to keep more advanced bookkeeping of the VLANs we
have, notably we'll have to check how many untagged and how many tagged
VLANs we have. This will have to stay in a structure, and allocating
another 16 KB array for that is again a bit too much.
So refactor the bridge VLANs in a linked list of structures.
The hook points inside the driver are ocelot_vlan_member_add() and
ocelot_vlan_member_del(), which previously used to operate on the
ocelot->vlan_mask[vid] array element.
ocelot_vlan_member_add() and ocelot_vlan_member_del() used to call
ocelot_vlan_member_set() to commit to the ocelot->vlan_mask.
Additionally, we had two calls to ocelot_vlan_member_set() from outside
those callers, and those were directly from ocelot_vlan_init().
Those calls do not set up bridging service VLANs, instead they:
- clear the VLAN table on reset
- set the port pvid to the value used by this driver for VLAN-unaware
standalone port operation (VID 0)
So now, when we have a structure which represents actual bridge VLANs,
VID 0 doesn't belong in that structure, since it is not part of the
bridging layer.
So delete the middle man, ocelot_vlan_member_set(), and let
ocelot_vlan_init() call directly ocelot_vlant_set_mask() which forgoes
any data structure and writes directly to hardware, which is all that we
need.
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
drivers/net/ethernet/mscc/ocelot.c | 81 ++++++++++++++++++++++++------
include/soc/mscc/ocelot.h | 9 +++-
2 files changed, 72 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index b09929970273..c8c0b0f0dd59 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -219,31 +219,79 @@ static void ocelot_port_set_pvid(struct ocelot *ocelot, int port,
ANA_PORT_DROP_CFG, port);
}
-static int ocelot_vlan_member_set(struct ocelot *ocelot, u32 vlan_mask, u16 vid)
+static struct ocelot_bridge_vlan *ocelot_bridge_vlan_find(struct ocelot *ocelot,
+ u16 vid)
{
- int err;
+ struct ocelot_bridge_vlan *vlan;
- err = ocelot_vlant_set_mask(ocelot, vid, vlan_mask);
- if (err)
- return err;
+ list_for_each_entry(vlan, &ocelot->vlans, list)
+ if (vlan->vid == vid)
+ return vlan;
- ocelot->vlan_mask[vid] = vlan_mask;
-
- return 0;
+ return NULL;
}
static int ocelot_vlan_member_add(struct ocelot *ocelot, int port, u16 vid)
{
- return ocelot_vlan_member_set(ocelot,
- ocelot->vlan_mask[vid] | BIT(port),
- vid);
+ struct ocelot_bridge_vlan *vlan = ocelot_bridge_vlan_find(ocelot, vid);
+ unsigned long portmask;
+ int err;
+
+ if (vlan) {
+ portmask = vlan->portmask | BIT(port);
+
+ err = ocelot_vlant_set_mask(ocelot, vid, portmask);
+ if (err)
+ return err;
+
+ vlan->portmask = portmask;
+
+ return 0;
+ }
+
+ vlan = kzalloc(sizeof(*vlan), GFP_KERNEL);
+ if (!vlan)
+ return -ENOMEM;
+
+ portmask = BIT(port);
+
+ err = ocelot_vlant_set_mask(ocelot, vid, portmask);
+ if (err) {
+ kfree(vlan);
+ return err;
+ }
+
+ vlan->vid = vid;
+ vlan->portmask = portmask;
+ INIT_LIST_HEAD(&vlan->list);
+ list_add_tail(&vlan->list, &ocelot->vlans);
+
+ return 0;
}
static int ocelot_vlan_member_del(struct ocelot *ocelot, int port, u16 vid)
{
- return ocelot_vlan_member_set(ocelot,
- ocelot->vlan_mask[vid] & ~BIT(port),
- vid);
+ struct ocelot_bridge_vlan *vlan = ocelot_bridge_vlan_find(ocelot, vid);
+ unsigned long portmask;
+ int err;
+
+ if (!vlan)
+ return 0;
+
+ portmask = vlan->portmask & ~BIT(port);
+
+ err = ocelot_vlant_set_mask(ocelot, vid, portmask);
+ if (err)
+ return err;
+
+ vlan->portmask = portmask;
+ if (vlan->portmask)
+ return 0;
+
+ list_del(&vlan->list);
+ kfree(vlan);
+
+ return 0;
}
int ocelot_port_vlan_filtering(struct ocelot *ocelot, int port,
@@ -369,13 +417,13 @@ static void ocelot_vlan_init(struct ocelot *ocelot)
/* Configure the port VLAN memberships */
for (vid = 1; vid < VLAN_N_VID; vid++)
- ocelot_vlan_member_set(ocelot, 0, vid);
+ ocelot_vlant_set_mask(ocelot, vid, 0);
/* Because VLAN filtering is enabled, we need VID 0 to get untagged
* traffic. It is added automatically if 8021q module is loaded, but
* we can't rely on it since module may be not loaded.
*/
- ocelot_vlan_member_set(ocelot, all_ports, 0);
+ ocelot_vlant_set_mask(ocelot, 0, all_ports);
/* Set vlan ingress filter mask to all ports but the CPU port by
* default.
@@ -2127,6 +2175,7 @@ int ocelot_init(struct ocelot *ocelot)
INIT_LIST_HEAD(&ocelot->multicast);
INIT_LIST_HEAD(&ocelot->pgids);
+ INIT_LIST_HEAD(&ocelot->vlans);
ocelot_detect_features(ocelot);
ocelot_mact_init(ocelot);
ocelot_vlan_init(ocelot);
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 0568b25c8659..9f2ea7995075 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -568,6 +568,12 @@ struct ocelot_vlan {
u16 vid;
};
+struct ocelot_bridge_vlan {
+ u16 vid;
+ unsigned long portmask;
+ struct list_head list;
+};
+
enum ocelot_port_tag_config {
/* all VLANs are egress-untagged */
OCELOT_PORT_TAG_DISABLED = 0,
@@ -646,8 +652,7 @@ struct ocelot {
u8 base_mac[ETH_ALEN];
- /* Keep track of the vlan port masks */
- u32 vlan_mask[VLAN_N_VID];
+ struct list_head vlans;
/* Switches like VSC9959 have flooding per traffic class */
int num_flooding_pgids;
--
2.25.1
Powered by blists - more mailing lists