| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211022120624.18069-15-luoj@codeaurora.org>
Date: Fri, 22 Oct 2021 20:06:24 +0800
From: Luo Jie <luoj@...eaurora.org>
To: andrew@...n.ch, hkallweit1@...il.com, linux@...linux.org.uk,
davem@...emloft.net, kuba@...nel.org
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
sricharan@...eaurora.org, Luo Jie <luoj@...eaurora.org>
Subject: [PATCH v4 14/14] net: phy: add qca8081 cdt feature
To perform CDT of qca8081 phy:
1. disable hibernation.
2. force phy working in MDI mode.
3. force phy working in 1000BASE-T mode.
4. configure the related thresholds.
Signed-off-by: Luo Jie <luoj@...eaurora.org>
---
drivers/net/phy/at803x.c | 194 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 191 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 227b97639987..822ca7846046 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -221,6 +221,32 @@
#define QCA808X_MASTER_SLAVE_SEED_CFG GENMASK(12, 2)
#define QCA808X_MASTER_SLAVE_SEED_RANGE 0x32
+/* Hibernation yields lower power consumpiton in contrast with normal operation mode.
+ * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s.
+ */
+#define QCA808X_DBG_AN_TEST 0xb
+#define QCA808X_HIBERNATION_EN BIT(15)
+
+#define QCA808X_CDT_ENABLE_TEST BIT(15)
+#define QCA808X_CDT_INTER_CHECK_DIS BIT(13)
+#define QCA808X_CDT_LENGTH_UNIT BIT(10)
+
+#define QCA808X_MMD3_CDT_STATUS 0x8064
+#define QCA808X_MMD3_CDT_DIAG_PAIR_A 0x8065
+#define QCA808X_MMD3_CDT_DIAG_PAIR_B 0x8066
+#define QCA808X_MMD3_CDT_DIAG_PAIR_C 0x8067
+#define QCA808X_MMD3_CDT_DIAG_PAIR_D 0x8068
+#define QCA808X_CDT_DIAG_LENGTH GENMASK(7, 0)
+
+#define QCA808X_CDT_CODE_PAIR_A GENMASK(15, 12)
+#define QCA808X_CDT_CODE_PAIR_B GENMASK(11, 8)
+#define QCA808X_CDT_CODE_PAIR_C GENMASK(7, 4)
+#define QCA808X_CDT_CODE_PAIR_D GENMASK(3, 0)
+#define QCA808X_CDT_STATUS_STAT_FAIL 0
+#define QCA808X_CDT_STATUS_STAT_NORMAL 1
+#define QCA808X_CDT_STATUS_STAT_OPEN 2
+#define QCA808X_CDT_STATUS_STAT_SHORT 3
+
MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");
@@ -1311,8 +1337,14 @@ static int at803x_cdt_start(struct phy_device *phydev, int pair)
{
u16 cdt;
- cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
- AT803X_CDT_ENABLE_TEST;
+ /* qca8081 takes the different bit 15 to enable CDT test */
+ if (phydev->drv->phy_id == QCA8081_PHY_ID)
+ cdt = QCA808X_CDT_ENABLE_TEST |
+ QCA808X_CDT_LENGTH_UNIT |
+ QCA808X_CDT_INTER_CHECK_DIS;
+ else
+ cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
+ AT803X_CDT_ENABLE_TEST;
return phy_write(phydev, AT803X_CDT, cdt);
}
@@ -1320,10 +1352,16 @@ static int at803x_cdt_start(struct phy_device *phydev, int pair)
static int at803x_cdt_wait_for_completion(struct phy_device *phydev)
{
int val, ret;
+ u16 cdt_en;
+
+ if (phydev->drv->phy_id == QCA8081_PHY_ID)
+ cdt_en = QCA808X_CDT_ENABLE_TEST;
+ else
+ cdt_en = AT803X_CDT_ENABLE_TEST;
/* One test run takes about 25ms */
ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
- !(val & AT803X_CDT_ENABLE_TEST),
+ !(val & cdt_en),
30000, 100000, true);
return ret < 0 ? ret : 0;
@@ -1592,6 +1630,153 @@ static int qca808x_soft_reset(struct phy_device *phydev)
return qca808x_phy_ms_seed_enable(phydev, true);
}
+static bool qca808x_cdt_fault_length_valid(int cdt_code)
+{
+ switch (cdt_code) {
+ case QCA808X_CDT_STATUS_STAT_SHORT:
+ case QCA808X_CDT_STATUS_STAT_OPEN:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int qca808x_cable_test_result_trans(int cdt_code)
+{
+ switch (cdt_code) {
+ case QCA808X_CDT_STATUS_STAT_NORMAL:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+ case QCA808X_CDT_STATUS_STAT_SHORT:
+ return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+ case QCA808X_CDT_STATUS_STAT_OPEN:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+ case QCA808X_CDT_STATUS_STAT_FAIL:
+ default:
+ return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+ }
+}
+
+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair)
+{
+ int val;
+ u32 cdt_length_reg = 0;
+
+ switch (pair) {
+ case ETHTOOL_A_CABLE_PAIR_A:
+ cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
+ break;
+ case ETHTOOL_A_CABLE_PAIR_B:
+ cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
+ break;
+ case ETHTOOL_A_CABLE_PAIR_C:
+ cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
+ break;
+ case ETHTOOL_A_CABLE_PAIR_D:
+ cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
+ if (val < 0)
+ return val;
+
+ return (FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val) * 824) / 10;
+}
+
+static int qca808x_cable_test_start(struct phy_device *phydev)
+{
+ int ret;
+
+ /* perform CDT with the following configs:
+ * 1. disable hibernation.
+ * 2. force PHY working in MDI mode.
+ * 3. for PHY working in 1000BaseT.
+ * 4. configure the threshold.
+ */
+
+ ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = at803x_config_mdix(phydev, ETH_TP_MDI);
+ if (ret < 0)
+ return ret;
+
+ /* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */
+ phydev->duplex = DUPLEX_FULL;
+ phydev->speed = SPEED_1000;
+ ret = genphy_c45_pma_setup_forced(phydev);
+ if (ret < 0)
+ return ret;
+
+ ret = genphy_setup_forced(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* configure the thresholds for open, short, pair ok test */
+ phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040);
+ phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040);
+ phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060);
+ phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050);
+ phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
+ phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
+
+ return 0;
+}
+
+static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
+{
+ int ret, val;
+ int pair_a, pair_b, pair_c, pair_d;
+
+ *finished = false;
+
+ ret = at803x_cdt_start(phydev, 0);
+ if (ret)
+ return ret;
+
+ ret = at803x_cdt_wait_for_completion(phydev);
+ if (ret)
+ return ret;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
+ if (val < 0)
+ return val;
+
+ pair_a = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, val);
+ pair_b = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, val);
+ pair_c = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, val);
+ pair_d = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, val);
+
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+ qca808x_cable_test_result_trans(pair_a));
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
+ qca808x_cable_test_result_trans(pair_b));
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
+ qca808x_cable_test_result_trans(pair_c));
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
+ qca808x_cable_test_result_trans(pair_d));
+
+ if (qca808x_cdt_fault_length_valid(pair_a))
+ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A,
+ qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A));
+ if (qca808x_cdt_fault_length_valid(pair_b))
+ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B,
+ qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B));
+ if (qca808x_cdt_fault_length_valid(pair_c))
+ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C,
+ qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C));
+ if (qca808x_cdt_fault_length_valid(pair_d))
+ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D,
+ qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D));
+
+ *finished = true;
+
+ return 0;
+}
+
static struct phy_driver at803x_driver[] = {
{
/* Qualcomm Atheros AR8035 */
@@ -1737,6 +1922,7 @@ static struct phy_driver at803x_driver[] = {
/* Qualcomm QCA8081 */
PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
.name = "Qualcomm QCA8081",
+ .flags = PHY_POLL_CABLE_TEST,
.config_intr = at803x_config_intr,
.handle_interrupt = at803x_handle_interrupt,
.get_tunable = at803x_get_tunable,
@@ -1750,6 +1936,8 @@ static struct phy_driver at803x_driver[] = {
.read_status = qca808x_read_status,
.config_init = qca808x_config_init,
.soft_reset = qca808x_soft_reset,
+ .cable_test_start = qca808x_cable_test_start,
+ .cable_test_get_status = qca808x_cable_test_get_status,
}, };
module_phy_driver(at803x_driver);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists