netdev - [PATCH v6 13/14] net: phy: adjust qca8081 master/slave seed value if link down

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211023095453.22615-14-luoj@codeaurora.org>
Date:   Sat, 23 Oct 2021 17:54:52 +0800
From:   Luo Jie <luoj@...eaurora.org>
To:     andrew@...n.ch, hkallweit1@...il.com, linux@...linux.org.uk,
        davem@...emloft.net, kuba@...nel.org
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        sricharan@...eaurora.org, Luo Jie <luoj@...eaurora.org>
Subject: [PATCH v6 13/14] net: phy: adjust qca8081 master/slave seed value if link down

1. The master/slave seed needs to be updated when the link can't
be created.

2. The case where two qca8081 PHYs are connected each other and
master/slave seed is generated as the same value also needs
to be considered, so adding this code change into read_status
instead of link_change_notify.

Signed-off-by: Luo Jie <luoj@...eaurora.org>
---
 drivers/net/phy/at803x.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 1418db4f2091..00733badcda5 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1655,6 +1655,22 @@ static int qca808x_read_status(struct phy_device *phydev)
 	else
 		phydev->interface = PHY_INTERFACE_MODE_SMII;
 
+	/* generate seed as a lower random value to make PHY linked as SLAVE easily,
+	 * except for master/slave configuration fault detected.
+	 * the reason for not putting this code into the function link_change_notify is
+	 * the corner case where the link partner is also the qca8081 PHY and the seed
+	 * value is configured as the same value, the link can't be up and no link change
+	 * occurs.
+	 */
+	if (!phydev->link) {
+		if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
+			qca808x_phy_ms_seed_enable(phydev, false);
+		} else {
+			qca808x_phy_ms_random_seed_set(phydev);
+			qca808x_phy_ms_seed_enable(phydev, true);
+		}
+	}
+
 	return 0;
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project